Applications
Energy and Environmental Technology
Alternative energy sources are renewable and have lower carbon emissions, compared to conventional energy sources. These include energy generated out of biomass, wind, solar, geothermal or hydroelectric. Combined with the use of recycling, the use of clean alternative energies will help ensure man's survival into the 21st century and beyond. All renewable energy sources are given by nature and therefore vary in their behavior which has to be measured and monitored to be used effectively
Reports
-
Humidity measurement in fuel cells
In fuel cells, hydrogen and oxygen react in a controlled manner to effi ciently produce electricity and heat. The voltage which is achieved depends on the fuel, the quality of the cell, the temperature and the relative humidity of the gases used
Download report -
Humidity monitoring in sewage plants
In sewage treatment plants, the sludge must be removed from the tanks at regular intervals with scrapers. These scrapers run along the rim of the tank, which subjects the rim to heavy static and dynamic loads
Download report -
Condensation monitoring of wind energy systems
The operation of modern wind energy systems requires extensive monitoring of the operating status with the aid of reliable sensors. Because of their exposed position and lack of accessibility, reliability is highly important and breakdowns must be avoided
Download report -
Ice detection for wind turbines
Monitoring of the external temperature and relative humidity is essential for the smooth running of wind energy systems. In order to ensure the safe and efficient operation of wind turbines, the weather conditions must be continuously monitored
Download report -
Oil monitoring for wind turbines
The warranty period of standard gear units for wind energy is usually 2 to 3 years. After the expiry of the warranty period, maintenance teams are responsible for the smooth running of the turbine for the remainder of its service life - which can be up to 20 years
Download report
-
EE46
Condensation monitor / dewpoint monitor
Dewpoint monitor / condensation monitor for mounting onto pipes or surfaces.
-
EE14
Hygrostat for wall and duct mounting
The hygrostat with a proven capacitive humidity sensor offers excellent long-term stability and reproducibility.
-
EE33
Humidity transmitter for high-humidity and chemical applications
High accuracy measurement of relative humidity, dewpoint and temperature even at high humidity close to the condensation or at high chemical load.
-
EE21
High accuracy HVAC transmitter for humidity & temperature
Temperature / humidity transmitter for high accuracy measurements in demanding air conditioning or outdoor applications.
-
EE35
Dewpoint transmitter up to -60°C Td
The dewpoint sensor with remote sensor and optional ball valve mounting permits flexible use in industrial process measurement technology.
-
EE371
Compact dewpoint transmitter / switch
The compact design is ideal for direct mounting into pipes. The ideal dewpoint sensor, e.g. for compressed air systems or plastic dryers.
