EE800
EE800 CO2、温度和湿度室内变送器
EE800系列CO2变送器可以同时精密测量CO2、温度(T)和相对湿度(RH)，适用于HVAC暖通空调系统。此外，它还可以计算出露点温度(Td)。
立即查询
EE800采用的E+E单光源双光束红外线测量技术可以自动进行光源老化补偿，并具有较高的抗污染能力，从而保证了产品出众的长期稳定性。在产品生产过程中，E+E工厂对CO2的浓度和温度进行了多点校准，使CO2变送器在全量程温度工作范围下获得了非常优秀的测量精度。
带标准模拟信号输出的EE800系列变送器同时可以附带一路被动温度电阻信号，并且有RS485附带物理接口，可以使用Modbus RTU和BACnetMS/TP通讯协议对绝对湿度、混合比、热焓、霜点温度和水蒸气分压力等参数进行输出。
典型应用
- 节能通风控制
- HVAC暖通空调系统
- 楼宇控制
您想进一步了解我们的产品?
我们期待为您提供帮助。
Key Features EE800
- 可以在一台设备上同时测量CO2、温度和相对湿度
- 提供Modbus RTU、BACnet数字通讯协议或标准模拟信号输出
- 可选被动温度元件输出
- 带自动校准功能，保证了产品出众的长期稳定性
- 温度补偿功能
- 较高的抗污染能力
- 扣环式设计外壳便于用户安装
- 可选LC显示屏
- 方便用户对变送器进行组态和调整
技术资料 EE800
0...2000 ppm
Working range CO2
0...5000 ppm< ±(50ppm + 2% of measuring value)
Accuracy CO2
< ±(50ppm + 3% of measuring value)10...90 % RH
Working range Humidity
±3 % RH (30...70 % RH)
Accuracy Humidity
±5 % (10...90 % RH)-20...60 °C (-4...140 °F)
Working range Temperature
±0.3 °C (±0.54 °F) voltage output
Accuracy Temperature
±0.7 °C (±1.26 °F) current output-30...55 °C (-22...131 °F)
Working range Dewpoint
< ±2 °C (3.6 °F) for /T/ - /Td/ < 25 °C (45 °F)
Accuracy Dewpoint
< ±3 °C (5.4 °F) for /T/ - /Td/ < 30 °C (54 °F)0-10 V or 4-20 mA
Output analogueModbus RTU or BACnet MS/TP
Output digital24 V AC/DC
Supply
您想进一步了解我们的产品?
我们期待为您提供帮助。
下载 EE800
| 技术资料 |
|---|
EE800 技术资料(515.09 kb) |
附件(4231.46 kb) |
| 操作手册 |
|---|
EE800 Manual(2090.62 kb) |
EE800 PICS - BACnet Protocol Implementation(211.09 kb) |
Mounting pattern for Room Transmitter(623.89 kb) |
| 其它 |
|---|
Modbus Application Note AN0103(181.41 kb) |
| 软件 |
|---|
EE-PCS Product Configuration Software(21501.32 kb) |
| Planning Data |
|---|
EE800 (EU Enclosure) BIM - Building Information Modeling (ifc)(69.77 kb) |
EE10 (US Enclosure) BIM - Building Information Modeling (ifc)(78.83 kb) |
| EU Declaration of Conformity |
|---|
EE800 (digital) DoC-CE(300.12 kb) |
EE800 (analogue) DoC-CE(305.56 kb) |
Declaration of Conformity to EU REACH(72.4 kb) |
EE800 FAQ
What is the difference between Modbus RTU and Modbus TCP/IP?
The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol on Ethernet hardware.
What is the difference between a BTL listed and a non-listed BACnet product.
All BACnet products are tested at E+E. The BTL listed E+E products have been additionally tested by the BACnet Testing Laboratories.
How can I clean the CO2 sensing cell?
Not at all. Do not temper in any way with the CO2 sensing cell. Please see the operation manual of the specific E+E CO2 measurement device.
How can I replace the CO2 sensing element?
Not at all. Do not temper in any way with the CO2 sensing cell. Please see the operation manual of the specific E+E CO2 measurement device.
Which E+E CO2 sensors feature auto-calibration function?
All E+E CO2 measuring devices feature an auto-calibration function. For details please refer to "Princibles of CO2 measurement".
My CO2 sensor shows temporary values lower than 400 ppm. Is this normal?
Yes, this in normal in several applications. It is the case for instance in new concrete buildings, due to the concrete carbonation effect. The calcium in the new concrete binds CO2 from the air.
What calibration certificate is included in the standard scope of supply of the E+E CO2 sensors?
The standard scope of supply of E+E CO2 sensors includes an inspection certificate according DIN EN 10204 - 2.2. For details on calibration certificates please see our white paper "Calibration and Traceability in Measuring Technology".
Can E+E supply an accredited calibration certificate with the CO2 sensor?
Accredited calibration certificate for CO2 is available upon request, please see our calibration website.
What is the difference between a 2 wire and a 3 wire current output?
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.