Here is what we have to say! We hope you enjoy reading our press releases.
E+E Elektronik to Provide National Measurement Standard for CO2 Gas Concentration
The calibration laboratory of sensor specialist E+E Elektronik has been commissioned by the Austrian Federal Office of Metrology and Surveying (BEV) to provide the national measurement standard (etalon) for CO2 gas concentration. This makes the calibration experts from Engerwitzdorf the highest metrological authority in the country for a further physical quantity following humidity, dew point and air velocity. As the BEV's designated institute, E+E Elektronik is authorised to perform special calibrations at the level of a national metrology institute for these physical quantities.
Humidity and Temperature Sensor with Interchangeable Sensing Module
The EE212 humidity and temperature sensor by E+E Elektronik is suitable for challenging measurement tasks in climate technology, agriculture and the pharmaceuticals industry. Thanks to the modular probe design the sensing module can be easily replaced directly on site if needed. E+E sensor coating, the wide choice of filter caps, and the robust IP65 / NEMA 4 enclosure ensure accurate and reliable measurements even under challenging working conditions.
Modular Sigma 05 Sensor Platform with Interchangeable Sensing Probes
The Sigma 05 acts as a sensor hub for E+E Elektronik’s intelligent Modbus probes. It makes it easy to set up a modular sensor platform with up to three probes and five measurands. The Sigma 05 supports E+E sensing probes for CO2, humidity, temperature, ambient pressure and air velocity, making it suitable for a wide range of applications.
Air Velocity Sensor for Laminar Flow Monitoring
The EE680 air velocity sensor by E+E Elektronik is used to monitor the laminar flow in cleanrooms or on safety workbenches. The sensor precisely measures the air velocity up to 2 m/s (400 ft/min) and simultaneously also the temperature. It meets the requirements of Good Manufacturing Practice (GMP) and is therefore ideally suited for the pharmaceuticals, biotechnology and microelectronics industries.
CO2 Traffic Light for Monitoring Indoor Air Quality
The CO2 Guard 10 by E+E Elektronik precisely measures the CO2 concentration of the indoor air. The battery-operated CO2 traffic light is perfect for use in indoor environments such as classrooms, offices or meeting rooms. An easy-to-understand LED traffic light system with an acoustic threshold value indicator delivers information on the air quality. The CO2 measuring device serves as a reference value encoder for demand-oriented and energy-efficient room ventilation.
Miniature Sensor Module Measures CO2, Temperature and Pressure
The new EE895 sensor module from E+E Elektronik measures CO2, temperature and ambient pressure. The small 3-in-1 module is an ideal choice for measuring instruments used for ventilation and climate control, in building automation or for process control. Due to its low power consumption, the module is also suitable for battery-operated devices such as hand-held meters, data loggers or wireless transmitters. The temperature and pressure compensation ensures high CO2 measurement accuracy under changing environmental conditions.
Heated Humidity and Temperature Probe for Meteorology
The EE260 humidity and temperature probe is the latest product development for meteorology from E+E Elektronik. Among other applications, this high-precision sensing probe is perfect for reliable weather monitoring in road traffic or at airports. The sensor and probe heating enables precise and continuous humidity measurement even in areas with high humidity levels. Due to its compact design, the EE260 is compatible with commercially available radiation shields.
Humidity and Temperature Probe with Digital Interface
The EE072 by E+E Elektronik is a highly accurate humidity and temperature probe for demanding process and climate control tasks. The probe can be used for example in agriculture and livestock farming, the food and pharmaceutical industries or in clean rooms. The digital interface with the Modbus RTU or CANopen communication protocol facilitates the design-in of the EE072.
Measuring Instrument Calibration in the Accredited E+E Calibration Laboratory
Austrian sensor manufacturer E+E Elektronik operates an EN ISO/IEC 17025 accredited calibration laboratory for humidity, dew point, CO2, air velocity, mass flow, temperature and pressure at its headquarters in Engerwitzdorf. Accredited calibrations are needed wherever particularly high accuracy of the used measuring instruments is required. The calibration certificates issued confirm the traceability of the measured values to the national standard to comply with globally recognised standards.
STAY HEALTHY - IMPORTANT INFORMATION!
It is our responsibility to guarantee the health and safety of our employees. The corona crisis hasn’t found us unprepared. We have worked hard to find possible solutions to ensure the safety of our employees and stakeholders and to guarantee the continuity of our business.
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature and ambient pressure. Additionally, the 4 in 1 probe also calculates the dew point temperature. It is perfectly suited for use in harsh and aggressive environment, such as agricultural applications. The active pressure and temperature compensation ensures a very high CO2 measuring accuracy. A heated probe version is available for CO2 measurement in high humidity applications.
Modbus Temperature Probe for Air, Gases and Liquids
The EE074 from E+E Elektronik is suitable for accurate temperature measurement of air, gases and liquids. The robust stainless steel probe can be used for climate and process control in the food and pharmaceutical industries, in clean rooms or in agriculture.