Here is what we have to say! We hope you enjoy reading our press releases.
Heated CO2 Probe with Replaceable Sensing Module
E+E Elektronik’s new EE872 CO2 probe measures CO2 concentration up to 5 % (50000 ppm) and features active pressure and temperature compensation with on-board sensors. The heated, replaceable CO2 sensing module and the long-term stable dual wavelength NDIR operation principle lead to outstanding measurement performance even under harsh and condensing conditions.
Highly Accurate Mass Flow and Dew Point Sensors for Compressed Air Monitoring
Show Preview: ComVac / Hannover, 1 - 5 April 2019
Thermal flow meters from E+E Elektronik accurately measure the compressed air consumption in pipes from DN15 to DN700. They are suitable for leak detection and thus contribute relevantly to cost reduction. High-precision E+E sensors monitor the dew point temperature and the risk of condensation in the compressed air network. This leads to safe operation and maximizes the lifetime of tools and machines.
Modbus and BACnet Temperature Sensors for Building Automation
The temperature sensors of the Austrian sensor manufacturer E+E Elektronik are now available with RS485 interface. The Modbus RTU and BACnet MS/TP protocols facilitate the integration into a bus system. The installation-friendly, IP65 / NEMA 4 enclosure is ideal for heating, ventilation and air conditioning systems.
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control.
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control.
Humidity Transmitters with Stainless Steel Enclosure
The high-end EE310 and EE360 industrial transmitters from E+E Elektronik are now available with stainless steel or with polycarbonate enclosure. The EE310 humidity and temperature transmitter is dedicated for demanding industrial processes control. The EE360 measures the moisture content of industrial oils and thus enables predictive maintenance of machines and plants.
Dew Point Measurement Module for High Humidity Applications
The EE1950 dew point measurement module from E+E Elektronik is dedicated for OEM applications with continuous high humidity and condensing conditions, such as climate and test chambers. Excellent temperature compensation ensures high accuracy over the entire working range from -70 °C to 180 °C (-94 °F to 356 °F). The device is also particularly resistant to pollutants and corrosive agents.
Laminar Flow Sensor with Digital Output
The EE660 from E+E Elektronik measures accurately very low air velocity. It is ideal for laminar flow monitoring and clean room applications. The transmitter is now also available with an RS485 interface.
New Humidity and Temperature Transmitter Up to 180 °C
The EE23 industrial transmitters from E+E Elektronik measure relative humidity and temperature and also calculate the dew point and frost point temperature. The new model EE23-T5 is suitable for a temperature range of -40 °C to 180 °C (-40 °F to 356 °F) and thus expands the application range of the proven transmitter series. The high-quality E+E humidity sensor with optional sensor coating ensures most accurate and long-term stable measurements.
3-in-1 Sensor for CO2, Humidity and Temperature
The duct mount EE850 from E+E Elektronik measures CO2 concentration up to 10000 ppm (1 %), as well as relative humidity (RH) and temperature (T). It is ideal for demand controlled ventilation, building automation and also for climate and process control. The 3-in-1 sensor features a dew point temperature (Td) and a passive temperature output.
E+E Elektronik Certified According to IATF 16949
The Austrian sensor manufacturer E+E Elektronik has recently completed the certification according to IATF 16949:2016. It confirms that the company’s quality assurance system complies with the high requirements of the automotive industry. The new standard follows the previous ISO/TS 16949 and is recognised by the world's leading automotive manufacturers.
HVAC Air Flow Transmitter with Digital Interface
The EE650 air flow transmitter from E+E Elektronik is dedicated for building automation and process control. The highly accurate device allows for reliable control of the air velocity in ventilation ducts and air conditioning systems. Besides the version with analogue output, the transmitter offers now RS485 interface and Modbus or BACnet protocol.