Here is what we have to say! We hope you enjoy reading our press releases.
Humidity Transmitters with Ethernet Interface
Beside the RS485 interface with Modbus RTU protocol, the EE310 humidity and temperature transmitter and the EE360 moisture in oil transmitter from E+E Elektronik now feature an Ethernet interface with Modbus TCP protocol.
CO2 Probe Resistant to Hydrogen Peroxide
The digital EE871 probe from E+E Elektronik measures CO2 concentrations up to 50,000 ppm (5 % CO2). The compact probe is now available with a special filter cap which ensures high accuracy and long-term stability in H2O2 contaminated environment. This opens up new applications for the EE871, particularly in the pharmaceutical and biotech industries, where hydrogen peroxide is used for cleaning and sterilization purposes.
Flow Meter Identifies Potential Savings in Compressed Air Supply
The monitoring of compressed air consumption ensures cost transparency and helps cutting energy costs by identifying potential savings. The EE741 in-line flow meter from E+E Elektronik is ideal for measuring the consumption of compressed air and technical gases. Due to its modular design, the compact device is suitable for pipe diameters from DN15 to DN50 (1/2” to 2”). The thermal hot-film anemometer measuring principle provides high accuracy and reliability.
Humidity and Temperature Transmitter with Interchangeable Probes
The EE220 transmitter from E+E Elektronik measures relative humidity and temperature in the range from -40 °C to 80 °C (-40 °F to 176 °F) with a high accuracy of ±2 % RH and ±0.1 °C (±0.18 °F). The basis unit can be fitted with various pluggable and interchangeable sensing probes. Separate probes for humidity and temperature enable highly accurate loop calibration. The easy-to-clean metal enclosure and stainless steel probes are ideal for clean room applications and use in the pharmaceutical and food industry.
Ex Transmitter with KC Certificate for Korea
The intrinsically safe EE300Ex humidity and temperature transmitter from E+E Elektronik now also bears the “Korean Certification Mark” (KC) required in Korea. The KC certification is comparable with the European ATEX, the American FM or the Japanese TIIS approvals already available for EE300Ex.
Heated Humidity Sensor for Radiosondes
The HMC03M humidity sensor from E+E Elektronik is dedicated for use in radiosondes and weather balloons. The sensor is characterized by a short response time even at low temperature. An integrated heating resistor ensures an excellent measuring performance under condensation and icing conditions. This makes the sensor ideal for weather observations in the upper atmosphere.
Early Warning of Condensation Danger
The compact EE046 from E+E Elektronik monitors reliably the condensation danger on chilled beams and other critical cold spots, in air conditioning systems or switching cabinets. It can be installed on plane surfaces and on pipes up to 50 mm (2”) diameter. For preventing condensation, the switch output can trigger actuators like valves or heaters.
Transmitter for Moisture in Oil Monitoring
The EE360 moisture in oil transmitter from E+E Elektronik is dedicated for reliable monitoring of lubrication, hydraulic and insulation oils as well as diesel fuel. The device measures water activity and temperature, and calculates the absolute water content of the oil. The probe can be employed up to 180 °C (356 °F) and 20 bar (290 psi). The colour display shows actual as well as logged measured data.
High-End Humidity and Temperature Transmitter with Multi-Functional Display
The highly accurate EE310 humidity and temperature transmitter from E+E Elektronik is dedicated for demanding process control. The modern multi-functional display with data logging function enables intuitive operation and offers an optimum overview of the measuring task. Extensive settings and diagnostics can thus be performed directly on the device.
Air Flow Probe with Modbus Interface
The EE671 compact air flow probe from E+E Elektronik measures air velocity up to 20 m/s (4000 ft/m) and is ideal for HVAC applications. The new version with Modbus RTU interface facilitates the EE761 integration into modern building automation systems.
CO2, T and RH Room Transmitter with New Housing Colours
The EE800 room transmitter from E+E Elektronik combines CO2, temperature (T) and relative humidity (RH) measurement in a single device. It is ideal for use in demand-controlled ventilation and indoor climate control. In addition to the standard housing colour “signal white”, the EE800 is now also available in "anthracite grey" and "white aluminum", which are the most common colours of light switches and power sockets.
Improved Long-Term Stability in High-Humidity Conditions
Humidity and Temperature Transmitter with Heated Sensing Probe
Continuous high relative humidity (RH) can impair the long-term stability and accuracy of humidity sensors. Therefore, the new EE211 humidity transmitter from the Austrian sensor specialist E+E Elektronik features a heated sensing probe. This leads to best accuracy and long-term stability in high-humidity (>85% RH) and even in condensing environment.