The EE071 accurately measures relative humidity and temperature and calculates physical quantitites such as dew point temperature, mixing ratio and absolute humidity.
The Modbus RTU digital interface allows for easy integration into networks. The compact design with M12 connector facilitates the installation and fast replacement of the probe.
The sensing element is perfectly protected against pollution and corrosion and stands for long term stability even in harsh environment. With an appropriate radiation shield EE071 is also suitable for outdoor applications.
- Highest measurement accuracy
- Excellent protection against pollution and corrosion
- Outstanding long term stability
- Wide working temperature range
- Temperature compensation
- Modbus RTU interface
- Easy integration into networks
- Low power consumption
- Compact and easily interchangeable
- Additional physical quantitites calculated
- Adjustment and Modbus setup by the user
- Stables, incubators, hatchers
- Storage rooms
- Wireless transmitters
- Data loggers and handhelds
0…100 % RHMeasuring range Humidity
±2 % RH (0…90 % RH)Accuracy Humidity
±3 % RH (90…100 % RH)
-40…80 °C (-40...176 °F)Measuring range Temperature
±0,1 °C at 23 °CAccuracy Temperature
Send us your e-mail, we will do our best to help you!
EE071 Datasheet(533.18 kb)
Humidity Calibration-Kit Datasheet(428.89 kb)
EE071 Manual(546.81 kb)
Calibration Kit - User Guide(1042.14 kb)
Cleaning Instructions(1054.21 kb)
Modbus Application Note AN0103(158.85 kb)
EE-PCS Product Configuration Software(28193.2 kb)
Humidity and Temperature Probe with Digital Output
Compact design, digital output and M12x1 connector facilitate easy installation and replacement of the EE07 humidity and temperature probe.
High Precision Humidity and Temperature Probe
High measurement accuracy over a wide working range and low power consumption for indoor and outdoor measurements.
EE060 / EE061
Humidity and Temperature Probe with Analogue Output
Humidity and temperature probe with analogue outputs. Outstanding long term stability in polluted environment due to encapsulated electronics and robust sensor with E+E proprietary coating.
Filter: PTFE membrane
Pores size: 1 µm
Length: 34mm (1.34")
Very good protection against fine dust
T range: -40...80°C (-40...176°F)
Response time t10/90: 15s
Suitable for Products:
Flange Coupling, 5 pins
Connecting Cable, 5 pins, flying leads - 1.5m
Connecting Cable, 5 pins, flying leads - 5m
Connecting Cable, 5 pins, flying leads - 10m
What is the difference between Modbus RTU and Modbus TCP/IP?
The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol on Ethernet hardware.
What is the difference between a 2 wire and a 3 wire current output?
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.