The outstanding long term stability of the EE1950 under continuous high humidity conditions rests on the innovative, heated E+E humidity and temperature sensing element HMC01.
Together with an additional, external temperature sensor, the dew point module is the perfect solution for precise calculation of the relative humidity and for climate chamber control.
The proprietary E+E coating protects the sensing element from dust, dirt and corrosive agents. Therefore, the EE1950 performs reliably even in harsh environment.
Thanks to the Automatic Sensor ReCovery (ARC) function, the sensor also copes well with chemical contamination. By controlled heating, the chemicals gaze out from the sensing element.
The analogue output of the EE1950 can be set to current or voltage. The service interface and the free EE-PCS configuration software allow for output scaling and adjustment. The electronics board is available in two sizes, for easy integration into existing climate and test chambers.
You want to know more about our products?
We are looking forward to help you.
Our calibration service packages ensure that you are on the safe side when it comes to the accuracy and vailability of your measuring devices. Choose the right service package for your E+E product and benefit rom professional device service, calculable costs and excellent measuring accuracy in the long-term. Here you can find more detailed information.
-70...180 °C (-94...356 °F)
Temperature Working Range-20...100 °C Td (-4...212 °F Td)
Measuring range Dew point0-1/5/10 V or 0/4-20mA (3-wire)
Outputs10-35V DC and 10-28V AC
SupplyYou want to know more about our products?
We are looking forward to help you.
| Datasheet | |
|---|---|
EE1950 Datasheet(1434.07 kb) |
|
Accessories(4231.46 kb) |
|
| Manual | |
|---|---|
EE1950 Manual(1046.03 kb) |
|
Cleaning Instructions(891.89 kb) |
|
Calibration Kit - User Guide(1042.14 kb) |
|
| Software | |
|---|---|
EE-PCS Product Configuration Software(29828.69 kb) |
|
| Calibration Service | |
|---|---|
E+E Calibration Service Packages(1621.21 kb) |
|
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.
