The EE300Ex humidity and temperature transmitter is dedicated for measurement in explosion hazard areas. It complies with the classifications for Europe (ATEX), International (IECEx) and USA / Canada (FM) and can be employed in gas and dust explosion hazard areas. The intrinsically safe EE300Ex can be installed in the explosion hazard area even in zones 0 / 20 (Divison 1).
The 2-part enclosure facilitates easy installation and dismounting for calibration without time-consuming wiring. The robust and easy-to-clean stainless steel housing is optimized for the pharmaceutical and chemical industries. The well proven E+E humidity sensor technology grants reliable, long-term stable measurements in challenging applications.
Besides measurement of relative humidity and temperature, the EE300Ex calculates all humidity related parameters, such as dew-point temperature [Td], wet-bulb temperature [Tw], absolute humidity [dv], etc. The intrinsically safe humidity and temperature transmitter features two 4-20 mA outputs in 2-wire technology.
Moisture in oil measurement
In the same way as humidity measurement in air, the EE300Ex is appropriate for moisture in oil measurement. The moisture content of oil can be issued absolute as water content in [ppm] or relative as water activity [aw]. Typical applications for moisture in oil measurement are found in systems for cleaning/drying oil or on oil platforms for online monitoring of lubrication and gear oils.
- For gas and dust applications
- Direct mounting in zones 0 / 20
- All humidity related physical quantities
- Best precision up to 180°C (356 °F)
- Pressure-tight up to 300 bar (4351 psi)
- Wall mount or remote probe versions
- Water content and water activity in oil
- Chemical industry
- Pharmaceutical industry
- Painting cabinets
- Explosion hazard storage rooms
- Power stations
- Grain mills
- Oil platforms
- Moisture in oil measurement
0-100% RHMeasuring range
-40...180 °C (-40…356 °F)
±0.2 °C (±0.36 °F)
0.01...300 bar (0.15…4351 psi)Pressure range
4-20 mA (2-wire)Output
24 V DCSupply
Send us your e-mail, we will do our best to help you!
EE300Ex-HT Datasheet(799.18 kb)
Scaling of the outputs(252.78 kb)
Humidity Calibration-Kit Datasheet(428.89 kb)
EE300Ex Manual(20702.34 kb)
Calibration Kit - User Guide(1042.14 kb)
Cleaning Instructions(1054.21 kb)
Material: PTFE sintered
Pores size: 50 µm
Length: 33mm (1.30")
Catalytic filter for H2O2 environment
T range: -40...180°C (-40...176°F)
Response time t10/90: 14s
Sterilization with H2O2
Suitable for Products:
Which is the difference between "intrinsically safe" (IS) and "explosion proof" (XP)?
Both IS and XP are based on limiting the available electrical energy in explosive atmosphere. IS devices limit the electrical energy to a non-incendive level so that sparks cannot occur. XP devices contain any spark which may occur, and withstand escaping warm gas.
May I change or remove the label of my ATEX device?
No, this is not allowed. The ATEX devices must carry the original manufacturer labels at all times.
What calibration certificate is included in the standard scope of supply of the ATEX E+E humidity and temperature measurement devices?
The standard scope of supply of ATEX E+E humidity and temperature measurement devices includes an inspection certificate according DIN EN 10204 - 3.1. For details on calibration certificates please see page 5 in www.kalibrierdienst.at/fileadmin/content/White_Paper_Calibration_and_traceability_in_measuring_technology.pdf
Can E+E supply an accredited calibration certificate with the ATEX transmitter?
Accredited calibration certificate for ATEX E+E humidity and temperature measurement devices is available upon request, please see our calibration website.
What is the difference between a 2 wire and a 3 wire current output?
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.