Le capteur de CO2 E+E à double longueur d'onde, compense les effets du vieillisse¬ment, est grandement insensible à la pollution et offre une excellen¬te stabilité à long terme. Une procédure d'étalonnage usine en de multiples points de CO2 et de température lui confèrent une excellente précision de mesure de CO2 sur toute la gamme de Température.
Le EE800 avec sorties analogiques est équipé d'un capteur de température passive en option alors que le EE800 avec interface digitale (Modbus RTU ou Bacnet MS/TP) calcule des grandeurs physiques additionnelles : l'humidité absolue, le rapport de mélange, l'enthalpie, la température de point de givre, et la pression partielle de vapeur d'eau
Applications typiques
Vous voulez en savoir plus sur nos produits ?
Au plaisir de pouvoir vous aider.
0...2000 ppm
0...5000 ppm
< ±(50ppm + 2% de la valeur mesurée)
< ±(50ppm + 3% de la valeur mesurée)
10...90 % HR
±3 % HR (30...70 % HR)
±5 % (10...90 % HR)
-20...60 °C
±0.3 °C sortie tension t
±0.7 °C sortie courant
-30...55 °C)
< ±2 °C for /T/ - /Td/ < 25 °C
< ±3 °C for /T/ - /Td/ < 30 °C
0-10 V or 4-20 mA
Sorties AnalogiqueModbus RTU ou BACnet MS/TP
Sorties digitale24 V AC/DC
AlimentationVous voulez en savoir plus sur nos produits ?
Au plaisir de pouvoir vous aider.
Fiche technique |
---|
EE800 Fiche technique(515.79 kb) |
Accessoires(4231.46 kb) |
Manuel |
---|
EE800 Manual(2090.62 kb) |
EE800 PICS - BACnet Protocol Implementation(211.09 kb) |
Mounting pattern for Room Transmitter(623.89 kb) |
Littérature de support |
---|
Modbus Application Note AN0103(181.41 kb) |
Logiciel |
---|
EE-PCS Product Configuration Software(21501.32 kb) |
Planning Data |
---|
EE800 (EU Enclosure) BIM - Building Information Modeling (ifc)(69.77 kb) |
EE10 (US Enclosure) BIM - Building Information Modeling (ifc)(78.83 kb) |
EU Declaration of Conformity |
---|
EE800 (digital) DoC-CE(300.12 kb) |
EE800 (analogue) DoC-CE(305.56 kb) |
Declaration of Conformity to EU REACH(366.08 kb) |
The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol on Ethernet hardware.
All BACnet products are tested at E+E. The BTL listed E+E products have been additionally tested by the BACnet Testing Laboratories.
Not at all. Do not temper in any way with the CO2 sensing cell. Please see the operation manual of the specific E+E CO2 measurement device.
Not at all. Do not temper in any way with the CO2 sensing cell. Please see the operation manual of the specific E+E CO2 measurement device.
All E+E CO2 measuring devices feature an auto-calibration function. For details please refer to "Princibles of CO2 measurement".
Yes, this in normal in several applications. It is the case for instance in new concrete buildings, due to the concrete carbonation effect. The calcium in the new concrete binds CO2 from the air.
The standard scope of supply of E+E CO2 sensors includes an inspection certificate according DIN EN 10204 - 2.2. For details on calibration certificates please see our white paper "Calibration and Traceability in Measuring Technology".
Accredited calibration certificate for CO2 is available upon request, please see our calibration website.
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.