The EE610 is dedicated for the highly accurate measurement of low differential pressure in medical, pharmaceutical and clean room applications. It can be employed in air or in non-flammable and non-aggressive gases.
The EE610 offers selectable measuring ranges of ±25, ±50, ±100 and 0...100 Pa. The long-term stable, piezo-resistive non-flow-through pressure sensing element excludes the risk of cross-contamination.
Analogue Output and Display
The measured data is available as analogue current and voltage output. The graphic display shows the reading in Pa, mbar, inch water column or mm H2O.
Functional and Robust
The IP65 / NEMA 4 enclosure facilitates easy mounting and minimizes installation costs. External mounting holes allow installation with closed cover.
Configurable and Adjustable
The setup and adjustment of the EE610 can be performed with DIP-switches and push buttons on the electronics board: choice of pressure range, output signal, time constant, display units and backlight.
- Multi-range device
- High accuracy
- Fully configurable
- Large graphic display
- Installation-friendly enclosure
± 25 / ± 50 / ± 100 PaMeasuring range
±0.5 Pa = 0.5 % FS*Accuracy - *Full Scale
± 7000 PaOverload limit
0-5 V or 0-10 V andAnalog outputs - selectable with DIP switches
0-20 mA or 4-20 mA
Questions sur nos produits?
Pour plus d'information, nous contacter ici!
- ± 25 / ± 50 / ± 100 Pa
- 0...100 Pa
- Accuracy ± 0.5 Pa
- Knockout for ½" conduit fitting (US)
- Graphic display with backlight
- External mounting holes
- Mounting with closed cover
- Electronics protected against construction site pollution
- Easy and fast mounting
- Status LED
- Spring terminals
- IP65 / NEMA 4 protection class
- Bayonet screws - open/closed with a ¼ rotation
- User configurable and adjustable
- Pressure range
- Output signal
- Time constant
- Display units and backlight
- Zero and span point adjustment
EE610 Datasheet(1227.21 kb)
EE610 Manual(1425.98 kb)
EE610 Quick Guide(428.71 kb)