Humidity and Temperature Room Sensor

Link in einer Lightbox öffnen
  • Temperature
  • Humidity

EE10

Highly accurate, long term stable humidity and temperature room sensor for residential and commercial HVAC.

  • EE10 humidity and temperature sensor with display, EU Standard

  • EE10 humidity and temperature sensor, EU Standard

  • EE10 humidity and temperature sensor, EU Standard

  • EE10 humidity and temperature sensor, EU Standard

  • EE10 humidity and temperature sensor with display, US Standard

  • EE10 humidity and temperature sensor, US Standard

    The very stylish EE10 enclosure is available in European and US size and in several colours. The snap-on concept allows for easy installation. The active part of the device can be replaced within seconds without any tools.

    The measured data is available on two 4 - 20mA or 0 - 10V outputs, on the Modbus RTU or the BACnet interface, as well as on the optional display.

    Caratteristiche

    • High accuracy and long term stability
    • Elegant design
    • Easy installation and service
    • Analogue, Modbus RTU or BACnet output

    Dati Tecnici

    Measuring range
    0...95% RH
    -5...55 °C (23...131 °F)
    Accuracy
    ±2% RH
    ±0.25 °C (±0.45 °F)
    Outputs
    0-10 V, 4-20 mA, Modbus RTU, BACnet
    Supply
    24 V AC/DC

    Prodotti correlati

    EE10-T

    EE800

    Downloads EE10

    Scheda tecnica
    Planning Data

    FAQ

    Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.

    The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol on Ethernet hardware.

    Vuoi sapere di più sui nostri prodotti?

    Errore: Impossibile caricare il modulo di contatto
    LinkedIn Logo