소형 오일 수분 센서

Open Link in Lightbox
  • Moisture in Oil

EE381

견고한 설계로 장기적으로 안정적인 측정값을 제공하는 오일 수분 센서 EE381은 다양한 오일 내 수분 함량 모니터링은 물론 플랜트 및 기계의 유지 보수에 이상적입니다.

  • EE381 오일수분센서 디스플레이타입

    EE381은 수분 활성도[aw]와 온도[T]를 측정하고 디젤 연료뿐만 아니라 변압기, 윤활유 및 유압유의 수분함량[x]을 ppm 단위로 계산합니다.

    측정 된 데이터는 4-20mA 또는 0-1/5/10V 아날로그 출력 및 LCD 디스플레이로 제품 액정에서 바로 확인 할 수 있습니다.

    견고한 메탈 재질의 EE381 외형과 제품 몸체회전이 가능해 설치 및 LED상태 확인이 간편합니다.

    무료제공 소프트웨어 EE-PCS와 옵션으로 구매 가능한 아답터를 사용해 EE381의 설정값을 간편하게 구성 및 조정할 수 있습니다.

    주요 특징들

    • 측정: 수분활성도[aw], 온도[T] 및 수분함량x[ppm]
    • 최대 120°C(248°F)의 온도 적용가능
    • 4-20mA 또는 0-1/5/10V 아날로그 출력
    • LCD 디스플레이 창
    • LED 상태표시
    • 최대 20bar의 압력 적용가능
    • G½"ISO 또는 ½"NPT 연결
    • 제품 몸체회전 가능
    • 설정 값 구성 및 조정 가능

    기술자료

    Measuring range
    0...1 aw
    -40...120 °C (-40...248 °F)
    Accuracy
    ±0.02 aw
    ±0.2 °C (±0.36 °F)
    Outputs
    0-1/5/10V or 0/4-20mA
    Supply
    10-30V DC

    Calibrating your limits

    제품과 서비스는 측정에 사용하는 도구만큼 정확할 수 있습니다. 20년 이상의 경험을 가진 E+E Elektronik의 교정 팀은 불필요한 지연이나 편향 없이 신뢰할 수 있는 서비스를 제공하는 데 중점을 둡니다.

    다음 사항을 우선시하는 교정 전문가와 협력하는 것의 가치를 알아보세요.

    • 정확성
    • 신속성 및
    • 신뢰성

    더 자세한 정보

    관련제품

    EE364

    다운로드 EE381

    자주 묻는 질문

    No, mineral transformer oils from different manufacturers are quite similar. A and B parameters are the same.

    Sensor replacement is possible for the EE360 models with the ordering code including PC4 (pluggable probe). Please see the operation manual for detail and spare part code ordering guide.

    No, coating is not available for the E+E MIO sensors.

    The standard scope of supply of E+E MIO sensors includes an inspection certificate according DIN EN 10204 - 3.1. For details on calibration certificates please see  our white paper "Calibration and Traceability in Measuring Technology".

    Transmitter with "two-wire" technology receive the power from the process, and the signal is carried on return wire (closed current loop). With "three-wires" technology the power supply is separate from current output: 2 wires are the power supply and the third carries the signal.

    Calibration for a specific oil is a laboratory procedure for determining the saturation curve of the oil. The saturation curve is described by two parameters (A and B). These parameters are used for setting up the moisture in oil sensor for correct calculation of the water content (ppm) out of the measured temperature and water activity (aw).

    Please see the cleaning instructions.

    저희 제품에 대해 더 알고 싶으십니까?

    오류: 문의 양식을 로드할 수 없습니다.
    LinkedIn Logo