실내용 온습도 센서

Open Link in Lightbox
  • Temperature
  • Humidity

EE10

정확한 온습도 측정값을 장기간 안정적으로 제공하는 실내용 센서로 주거공간 또는 상업용 건물의 공조시스템(HVAC)에 적용 가능합니다.

  • EE10 humidity and temperature sensor with display, EU Standard

  • EE10 humidity and temperature sensor, EU Standard

  • EE10 humidity and temperature sensor with display, US Standard

  • EE10 humidity and temperature sensor, US Standard

    세련된 디자인의 EE10의 크기 및 색상은 유럽과 미국의 규격으로 구분됩니다. 제품은 스냅 온 타입으로 쉽게 설치할 수 있으며 별도의 장비 없이도 빠르고 간편하게 교체 할 수 있습니다.

    측정 데이터는 4-20mA 또는 0-10V 아날로그 출력, Modbus RTU 또는 BACnet 인터페이스 디지털출력 또는 디스플레이 창에서 확인할 수 있습니다. 

    주요 특징들

    • 높은 정확성과 장기적인 안정성
    • 세련된 디자인
    • 간편한 설치 및 서비스
    • 아날로그, Modbus RTU 또는 BACnet 출력

    기술자료

    Measuring range
    0...95% RH
    -5...55 °C (23...131 °F)
    Accuracy
    ±2% RH
    ±0.25 °C (±0.45 °F)
    Outputs
    0-10 V, 4-20 mA, Modbus RTU, BACnet
    Supply
    24 V AC/DC

    관련제품

    EE10-T

    EE800

    다운로드 EE10

    Planning Data

    자주 묻는 질문

    The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol on Ethernet hardware.

    Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.

    저희 제품에 대해 더 알고 싶으십니까?

    오류: 문의 양식을 로드할 수 없습니다.
    LinkedIn Logo