Here is what we have to say! We hope you enjoy reading our press releases.
12. March 2020
4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure
The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature and ambient pressure. Additionally, the 4 in 1 probe also calculates the dew point temperature. It is perfectly suited for use in harsh and aggressive environment, such as agricultural applications. The active pressure and temperature compensation ensures a very high CO2 measuring accuracy. A heated probe version is available for CO2 measurement in high humidity applications.
23. October 2019
Modbus Temperature Probe for Air, Gases and Liquids
The EE074 from E+E Elektronik is suitable for accurate temperature measurement of air, gases and liquids. The robust stainless steel probe can be used for climate and process control in the food and pharmaceutical industries, in clean rooms or in agriculture.
25. September 2019
Differential Pressure Sensor with ±0.5 % Accuracy
The EE600 from E+E Elektronik measures the differential pressure in the range 0...1000 Pa or 0...10 000 Pa with an accuracy of ±0.5 % of the full scale. The sensor is dedicated for HVAC applications and can be employed for air and all non-flammable and non-aggressive gases.
14. August 2019
Intrinsically Safe Humidity and Temperature Sensor for Gas Explosion Hazard Areas
The new intrinsically safe EE100Ex from E+E Elektronik is certified according to the European ATEX directive 2014/34/EU and the international IECEx standards for use in gas explosion hazard areas up to zone 1. The humidity and temperature sensor offers high measuring accuracy and is dedicated for demanding climate and process control.
25. June 2019
Highly Accurate Low Differential Pressure Sensor
With the EE610, E+E Elektronik offers a new sensor for low differential pressure up to ±100 Pa with an accuracy of ±0.5 Pa. Due to selectable measuring ranges and versatile configuration options, the EE610 is suitable for a variety of applications in air as well as in non-flammable and non-aggressive gases.
09. May 2019
Messen und Kalibrieren
E+E Elektronik auf der SMART Automation in Linz, 14.-16. Mai 2019
Auf der SMART Automation (14.-16. Mai 2019) in Linz präsentiert E+E Elektronik am Stand DC-413 ein umfangreiches Messgeräte-Portfolio für die industrielle Automatisierung und Prozessüberwachung. Die Produktpalette umfasst Durchflussmesser für Druckluft und Gase, Taupunktsensoren, CO2 Messgeräte sowie Feuchte- und Temperatur Messumformer für anspruchsvolle Industrieanwendungen. Am Messefreigelände können die Messebesucher den E+E Kalibrierbus besichtigen und sich über die Kalibrierdienstleistungen der akkreditierten E+E Kalibrierstelle informieren.
18. April 2019
Robust CO2 Sensor with RS485 Interface
The well proven EE820 sensor from E+E Elektronik is appropriate for reliable monitoring the CO2 concentration in harsh and polluted applications such as agriculture and life stock barns. Beside voltage and current output, the sensor is now also available with RS485 interface with Modbus RTU or BACnet MS/TP protocol.
03. April 2019
Heated CO2 Probe with Replaceable Sensing Module
E+E Elektronik’s new EE872 CO2 probe measures CO2 concentration up to 5 % (50000 ppm) and features active pressure and temperature compensation with on-board sensors. The heated, replaceable CO2 sensing module and the long-term stable dual wavelength NDIR operation principle lead to outstanding measurement performance even under harsh and condensing conditions.
20. March 2019
Highly Accurate Mass Flow and Dew Point Sensors for Compressed Air Monitoring
Show Preview: ComVac / Hannover, 1 - 5 April 2019
Thermal flow meters from E+E Elektronik accurately measure the compressed air consumption in pipes from DN15 to DN700. They are suitable for leak detection and thus contribute relevantly to cost reduction. High-precision E+E sensors monitor the dew point temperature and the risk of condensation in the compressed air network. This leads to safe operation and maximizes the lifetime of tools and machines.
13. March 2019
Modbus and BACnet Temperature Sensors for Building Automation
The temperature sensors of the Austrian sensor manufacturer E+E Elektronik are now available with RS485 interface. The Modbus RTU and BACnet MS/TP protocols facilitate the integration into a bus system. The installation-friendly, IP65 / NEMA 4 enclosure is ideal for heating, ventilation and air conditioning systems.
12. February 2019
New CO2 Sensor for Railway Applications
The EE8915 from E+E Elektronik meets all relevant railway standards for reliable CO2 measurement in railway vehicles, e.g. in the passenger compartment or driver's cab. On-board sensors ensure high CO2 measurement accuracy independently of temperature, altitude or weather conditions. Due to excellent measurement performance in harsh environment, the sensor is also suitable for demanding process and climate control.
16. January 2019
Digital CO2, Humidity and Temperature Sensor
The EE850 duct mount sensor from E+E Elektronik combines the CO2, relative humidity (RH) and temperature (T) measurement in a single device. The sensor can be easily integrated into a bus system via the RS485 interface (Modbus RTU or BACnet MS/TP). The 3-in-1 device is dedicated for building automation as well as for demanding process control.