The EE1900 module consists of an electronics board and a sensing probe. It employs an innovative combined humidity and temperature sensing element, which is well protected from pollution and corrosion by the proprietary E+E coating. This leads to high accuracy and excellent long-term stability even under harsh environmental conditions.
Thanks to the Automatic Sensor ReCovery (ARC) function, the sensor also copes well with chemical contamination. By controlled heating, the chemicals gaze out from the sensing element.The ARC mode can be triggered either via a push button on the board or an electrical signal.
The humidity module features an analogue output, which can be set to current or voltage. The service interface allows for output scaling and adjustment of the humidity measurement. The product configuration software EE-PCS is available free of charge.
The high quality, flexible probe cable up to 3m length facilitates the probe installation. With two sizes of the electronics board the module can be easily integrated into existing climate chambers.
Our calibration service packages ensure that you are on the safe side when it comes to the accuracy and vailability of your measuring devices. Choose the right service package for your E+E product and benefit rom professional device service, calculable costs and excellent measuring accuracy in the long-term. Here you can find more detailed information.
± 2% RH (≤90% RH)
± 2.5% RH (>90% RH)
± 2.5% RH (≤90% RH)
± 3.5% RH (>90% RH)
0...100% RH / -20...80 °C Td (-4...176 °F Td)Measurement range relative humdity / dew point
± 2 °C (± 3.6 °F)Accuracy dew point, Tambient-Td <20 °C (36 °F)
0-1/5/10 V or 0/4-20mA (3-wire)Outputs
15-35V DC and 17-29V ACSupply
EE1900 Datasheet(890.44 kb)
EE1900 Manual(739.56 kb)
Cleaning Instructions(891.89 kb)
Calibration Kit - User Guide(537.45 kb)
Information about the monolithic humidity sensor HMC01(77.14 kb)
EE-PCS Product Configuration Software(21982.92 kb)
E+E Calibration Service Packages(1587.8 kb)
|EU Declaration of Conformity|
Declaration of Conformity to EU REACH(367.42 kb)
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.