Room Sensor for Temperature

Open Link in Lightbox
  • Temperature

TES201

The TES201 accurately measures room temperature (T) in residential and commercial HVAC systems and is suitable for any indoor situation. The room sensor is available in two enclosure sizes (EU and US format) and features an optional display.

  • TES201 room temperature sensor with display - EU format

  • TES201 room temperature sensor - EU format

  • TES201 room temperature sensor with display - US format

  • TES201 room temperature sensor - US format

    Measurement Performance
    The state-of-the-art E+E temperature sensing element ensures highly accurate and long-term stable temperature measurement. The innovative enclosure of the TES201 avoids false air ingress and significantly reduces self-heating.

    Outputs and Digital Interface
    The measured data is available either on the analogue output or on the RS485 interface with Modbus RTU or BACnet MS/TP protocol.

    The TES201 with RS485 interface can be set up and configured via PC with the free PCS10 Product Configuration Software and an optional configuration adapter.

    Installation-friendly Enclosure
    The enclosure of the TES201 facilitates fast and thus cost-saving installation. The back cover with the push-in spring terminals can be mounted and wired without the front cover. This means that the electronics, which are accommodated in the front cover, are not exposed to construction site pollution. Before commissioning, the active part can be simply snapped onto the back cover. Besides, the electronics part can be replaced without tools within seconds.

    Typical Applications

    • Demand controlled ventilation
    • Heating, ventilation and air conditioning
    • Building automation

    Key Features

    • Highly accurate, long-term stable T measurement
    • Modbus RTU, BACnet MS/TP or analogue output
    • Large graphic display (optional)
    • Snap-on enclosure for time-saving installation
    • EU and US enclosure format
    • Easy configuration
    TES201 features

    Technical data

    Measuring range
    -30...+60 °C (-22...+140 °F)

    Accuracy
    ±0.25 °C (±0.14 °F), voltage output / RS485
    ±0.38 °C (±0.21 °F), current output
    Output analogue
    0-10 V or 4-20 mA
    Output digital
    RS485 (Modbus RTU or BACnet MS/TP)
    Power supply
    15-35 V DC or 24 V AC ±20 %

    Calibrating your limits

    Your products and services can only be as precise as the tools you use to measure them. With more than 20 years of experience, the calibration team of E+E Elektronik focuses on providing a reliable service without any unnecessary delays or bias.

    Discover the value of working with an expert in calibration that prioritizes

    • accuracy,
    • fastness and
    • reliability

    Learn more

    Related products

    CDS201

    HTS201

    Downloads TES201

    FAQ

    Transmitter with "two-wire" technology receive the power from the process, and the signal is carried on return wire (closed current loop). With "three-wires" technology the power supply is separate from current output: 2 wires are the power supply and the third carries the signal.

    You want to know more about our products?

    Error: Contact form could not be loaded
    LinkedIn Logo