With the integrated web server (no need for any additional software) facilitates the set up of the wireless network via Ethernet interface. The measured data from the transmitters is available at EE242 on Modbus RTU and TCP/IP. Four of the measurands can be selected for the analogue outputs of EE242.
You want to know more about our products?
We are looking forward to help you.
2.4 GHz
Transmission frequencyIEE 802.15.4
Transmission protocol10mW
Transmission power1000m in open field
RangeAnalogue, Modbus TCP, Modbus RTU
OutputsYou want to know more about our products?
We are looking forward to help you.
Datasheet |
---|
EE240 Datasheet(1577.91 kb) |
EE871 Datasheet(928.82 kb) |
EE07 Datasheet(565.6 kb) |
Accessories(4231.46 kb) |
Humidity Calibration-Kit Datasheet(642.96 kb) |
Manual |
---|
EE240 Manual(6432.27 kb) |
EE871 Manual(1137.11 kb) |
Calibration Kit - User Guide(537.45 kb) |
Cleaning Instructions(891.89 kb) |
Support literature |
---|
Application Note AN1201-1 for EE242 Data Logger(343.28 kb) |
EE242 Protocol Description(49.2 kb) |
Modbus Application Note AN0103(181.41 kb) |
Software |
---|
DSW10 Diagnosis Software(5793.96 kb) |
EU Declaration of Conformity |
---|
EE241_EE242 CE-DoC(396.67 kb) |
Declaration of Conformity to EU REACH(366.08 kb) |
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.