Digital Humidity and Temperature Probe

Open Link in Lightbox
  • Humidity
  • Temperature
  • Sigma 05

HTP501

The digital humidity and temperature probe HTP501 is designed for use in drying chambers and other demanding industrial applications. The stainless steel probe offers excellent measurement accuracy and can be deployed in temperatures ranging from -40 to 120 °C (-40 to 248 °F). The measured values are available on the RS485 interface with Modbus RTU protocol.

  • HTP501 digital humidity and temperature probe

  • Humidity and temperature probe HTP501 with Sigma 05

    High measurement accuracy, easy data integration
    The HTP501 measures the relative humidity and temperature in an operating range of -40 to 120 °C (-40 to 248 °F). The high-quality E+E humidity sensing element, temperature compensation and configurable pressure compensation ensure excellent measurement accuracy. In addition to the measured humidity and temperature values, the sensing probe calculates further humidity-related physical quantities such as the dew point temperature, absolute humidity or mixing ratio. The measured data are available on the RS485 interface and can be easily integrated into process control using the Modbus RTU protocol.

    Optimised for harsh environmental conditions
    The probe features a rugged IP66 stainless steel enclosure, a high-temperature cable with moulded M12 connector, and a choice of different filter caps. The electronics are well protected inside the probe and therefore safe from condensation and corrosion. The E+E proprietary coating protects the humidity sensing element and its leads against dust and corrosive deposits, ensuring excellent measuring performance and long-term stability in harsh conditions. An optional sensor leads protection helps to significantly extend the service life of the sensing element in particularly aggressive environments.

    Flexible and extensible
    Two probe lengths (200 mm and 400 mm) and three different cable lengths offer the user a huge degree of flexibility when installing the HTP501. The free PCS10 configuration software facilitates the setup and supports individual configuration of the probe. The HTP501 is compatible with the Sigma 05 sensor hub by E+E Elektronik. The digital sensing probe can be plugged into the host device based on the plug-and-play principle and thus extended to a sensor unit with display and analogue outputs.

    For the use of this service, prior consent to the processing of your data and in particular to the setting of cookies is necessary. You can consent to the processing and setting of cookies here. Without your consent, your data will not be processed in connection with this service and no cookies will be set. You can revoke your consent at any time. For more information on cookies and the processing of your data in connection with this content and a way to revoke your consent, please see our privacy policy.

    Sigma 05 -  Modular Sensor Platform

    The HTP501 is compatible with the Sigma 05 host device of the E+E Modular Sensor Platform. Together they become a versatile, plug-and-play humidity and temperature sensor with interchangeable probe, analogue outputs and optional display. Besides HTP501, Sigma 05 accommodates also other E+E intelligent sensing probes. See www.epluse.com/sigma05 for further details.

    Humidity and temperature probe HTP501 with Sigma 05

    Caractéristiques

    • High accuracy and wide temperature range
    • High-end RH sensing element with E+E proprietary coating protection and optional cast leads
    • Fully protected electronics 
    • Stainless steel probe in several lengths
    • Flexible high temperature cable in several lengths
    • Moulded M12x1 connector with standardized pin-out
    • RS485 with Modbus RTU protocol
    • Calculation of relevant humidity related physical quantities
    • Wide choice of filter caps

    Données techniques

    MEASURING RANGE HUMIDITY
    0…100 % RH
    ACCURACY HUMIDITY
    ± 1.3 %RH
    MEASURING RANGE TEMPERATURE
    -40…120 °C (-40…248 °F)
    ACCURACY TEMPERATURE
    ± 0.1 °C at 20 °C
    OUTPUT
    Modbus RTU
    SUPPLY
    8…35 V DC

    Calibrating your limits

    La précision de vos produits et services dépend des outils que vous utilisez pour les mesurer. Forte de plus de 20 ans d'expérience, l'équipe d'étalonnage de E+E Elektronik s'attache à fournir un service fiable, sans retard ni parti pris inutile.

    Découvrez l'intérêt de travailler avec un expert en étalonnage qui accorde la priorité à

    • la précision,
    • rapidité et
    • fiabilité

    Plus d'informations

    Téléchargements HTP501

    Logiciel

    Vous voulez en savoir plus sur nos produits ?

    Erreur : Le formulaire de contact n'a pas pu être chargé
    LinkedIn Logo