EE210

应对苛刻环境控制要求的温湿度变送器

EE210系列温湿度变送器能满足苛刻环境控制行业对温湿度测量的高要求。

立即查询

即使在污染侵蚀的环境中,EE210仍能保持优秀的性能,这主要得益于我们将位于探头内的测量电路和具有长期稳定性能的HCT01敏感元件有效地组合在一起,同时,对测量电路采取完全密闭的封装保护措施。

特点


可计算多种物理参数

  • 露点温度
  • 霜点温度
  • 绝对湿度
  • 混合比
  • 水蒸气分压力
  • 比焓

典型应用

  • 农业
  • 牛棚、孵化室、培养室
  • 绿色大棚
  • 储藏室、冷却室
  • 室内泳池

您想进一步了解我们的产品?
我们期待为您提供帮助。

Key Features EE210

  • 墙面安装和管道安装
  • 两路模拟信号输出,用户可自行进行组态
  • BACnet MS/TP 或 Modbus RTU 接口
  • 测量精度高
  • 出色的温度补偿功能
  • 可有效对抗结露和污染环境
  • 坚固的探头
  • 安装简便

技术资料 EE210

  • 0...100% RH


    湿度测量范围
  • -15...40 °C <90% RH ±(1.3+0.003*mv)% RH
    -15...40 °C >90% RH ±2.3% RH
    -40...60 °C ±(1.5+0.015*mv)% RH

    湿度精度
  • -40...80 °C

    温度测量范围
  • ±0.2 °C

    温度精度
  • 0-5/10 V 或 4-20 mA

    模拟输出
  • BACnet MS/TP 或 Modbus RTU

    数字输出
  • 24 V DC

    供电电源

您想进一步了解我们的产品?
我们期待为您提供帮助。

EE210 配件

  • HA010101

    Membrane filter

    Construction

    Material: PC
    Filter: PTFE membrane
    Pores size: 1 µm
    Length: 34mm (1.34")

    Features

    Very good protection against fine dust

    T range: -40...80°C (-40...176°F)
    Response time t10/90: 15s

    Typical applications

    Building automation
    Dusty environment

     

    Suitable for Products:

EE210 FAQ

  • What is the difference between Modbus RTU and Modbus TCP/IP?

    The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol on Ethernet hardware.

     

  • Which E+E products are BACnet certified?

    EE160 and EE210 are tested and certified by BTL (BACnet Testing Laboratories).

     

  • What is the difference between a BTL listed and a non-listed BACnet product.

    All BACnet products are tested at E+E. The BTL listed E+E products have been additionally tested by the BACnet Testing Laboratories.

     

  • What is the difference between a 2 wire and a 3 wire current output?

    Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.

     

您想进一步了解我们的产品?