手持式油中水分测量仪

Open Link in Lightbox

Oilport 30 Set

Oilport30手持表是一款可以监测不同油品中水含量和温度的产品。TFT触摸屏操作简单直观,内置数据记录功能,使Oilport30手持表成为快速可靠的油液分析的理想工具。

测量参数

  • 相对水含量/水活性[aw]
  • 绝对水含量[ppm]
  • 温度[°C / °F]

与气体湿度类似,油的含水量可以用ppm或相对含水量aw来表示。

  • ppm(水的质量/油的质量)
  • aw(当前含水量与饱和油样含水量的关系)完全无水油的aw值为0,完全饱和油的aw值为1。

Oilport30手持表可以测量水活性aw和温度T。通过输入不同的油品参数,手持表可以计算出水含量值ppm并在显示屏上显示出来。

探头

  • 油中水探头耐压达20bar
    配合是球阀安装装置,可在不中断设备工作流程的情况下进行安装或拆卸探头。
  • 油中水短探头直径12mm
    快速测定油样湿度的理想选择.
  • Oilport 30 Set

  • Oilport 30带球阀装置

  • Oilport 30油中水分短探头

  • Oilport 30耐压油中水分探头

    相关产品

    EE381

    EE364

    Omniport 30

    下载 Oilport 30 Set

    软件

    FAQ

    Calibration for a specific oil is a laboratory procedure for determining the saturation curve of the oil. The saturation curved is described by two parameters (A and B). These parameters are used for setting up the moisture in oil sensor for correct calculation of the water content (ppm) out of the measured temperature and water activity (aw).

    Sensor replacement is possible the EE360 models when option PC4 (pluggable probe). Please see the operation manual for detail and spare part code ordering guide.

    Please see the cleaning instructions.

    No, coating is not available for MIO sensors.

    The standard scope of supply of E+E MIO sensorsincludes an inspection certificate according DIN EN 10204 - 3.1. For details on calibration certificates please see our white paper "Calibration and Traceability in Measuring Technology".

    No, mineral transformer oils from different manufacturers are quite similar.. A and B parameters are the same.

    您想进一步了解我们的产品?

    错误:无法加载联系表
    LinkedIn Logo