Sensor for Very Low Air Velocity

  • Air flow

EE660

The EE660 air velocity sensor operates on the hot film anemometer principle and is optimised for precise measurement of very low air velocity in laminar flow monitoring and clean room applications.

Richiedi ora Ai download

  • EE660 air velocity sensor for duct mounting

  •

    EE660 air velocity sensor with remote probe and display

    EE660 employs E+E air flow sensors manufactured in thin film technology, which stands for excellent accuracy and long-term stability down to 0.15 m/s (30 ft/min). The device is available with current and voltage output or with RS485 interface an Modbus RTU or BACnet MS/TP interface. EE660 is user configurable and adjustable with jumpers on the electronics board or with the EE-PCS Product Configuration Software.

    Caratteristiche

    • Accurate measurement down to 0.15 m/s (30 ft/min)
    • Excellent long term stability
    • High resistance to pollution
    • Small angle dependency
    • Large, easily readable display
    • Current and voltage output
    • Modbus RTU or BACnet MS/TP
    • User configurable and adjustable

    Dati Tecnici

    Measuring range selectable by jumper
    0...1 m/s (0...200 ft/min)
    0...1.5 m/s (0...300 ft/min)
    0...2 m/s (0...400 ft/min)
    Accuracy at 20 °C (68 °F), 45 % RH, 1013 hectopascal
    0.15...1 m/s ±(0.04 m/s + 2 % of mv)
    0.15...1.5 m/s ±(0.05 m/s + 2 % of mv)
    0.15...2 m/s ±(0.06 m/s + 2 % of mv)
    Response time(at constant temperature)
    typ. 4 sec or typ. 1 sec.
    Output analogue - selectable
    0-10 V and 4-20 mA
    Output digital
    Modbus RTU or BACnet MS/TP
    Supply
    24 V AC/DC

    Calibrating your limits

    I vostri prodotti e servizi possono essere precisi solo quanto gli strumenti che utilizzate per misurarli. Con oltre 20 anni di esperienza, il team di calibrazione di E+E Elektronik si concentra sulla fornitura di un servizio affidabile senza inutili ritardi o imprecisioni.

    Scoprite il vantaggio di affidarvi ad un esperto di taratura che dà priorità a

    • accuratezza,
    • rapidità  
    • affidabilità

    Per saperne di più

    Prodotti correlati

    EE650

    EE75

    EE576

    Downloads EE660

    Scheda tecnica
    Manuale
    Supporto letteratura
    Declarations of Conformity
    Software di applicazione

    FAQ

    Transmitter with "two-wire" technology receive the power from the process, and the signal is carried on return wire (closed current loop). With "three-wires" technology the power supply is separate from current output: 2 wires are the power supply and the third carries the signal.

    Vuoi sapere di più sui nostri prodotti?

    Errore: Impossibile caricare il modulo di contatto
    LinkedIn Logo