Sensor for Very Low Air Velocity
EE660
The EE660 air velocity sensor operates on the hot film anemometer principle and is optimised for precise measurement of very low air velocity in laminar flow monitoring and clean room applications.
EE660 employs E+E air flow sensors manufactured in thin film technology, which stands for excellent accuracy and long-term stability down to 0.15 m/s (30 ft/min). The device is available with current and voltage output or with RS485 interface and Modbus RTU. EE660 is user configurable and adjustable with jumpers on the electronics board or with the EE-PCS Product Configuration Software.
Key Features
- Accurate measurement down to 0.15 m/s (30 ft/min)
- Excellent long term stability
- High resistance to pollution
- Small angle dependency
- Large, easily readable display
- Current and voltage output
- Modbus RTU
- User configurable and adjustable
Technical data
- Measuring range selectable by jumper
- 0...1 m/s (0...200 ft/min)
0...1.5 m/s (0...300 ft/min)
0...2 m/s (0...400 ft/min) - Accuracy at 20 °C (68 °F), 45 % RH, 1013 hectopascal
- 0.15...1 m/s ±(0.04 m/s + 2 % of mv)
0.15...1.5 m/s ±(0.05 m/s + 2 % of mv)
0.15...2 m/s ±(0.06 m/s + 2 % of mv) - Response time(at constant temperature)
- typ. 4 sec or typ. 1 sec.
- Output analogue - selectable
- 0-10 V and 4-20 mA
- Output digital
- Modbus RTU
- Supply
- 24 V AC/DC
Related products
Downloads EE660
FAQ
Transmitter with "two-wire" technology receive the power from the process, and the signal is carried on return wire (closed current loop). With "three-wires" technology the power supply is separate from current output: 2 wires are the power supply and the third carries the signal.