특히 열선이 포함된 온도/습도 일체형 센서를 사용하여 응축현상이나 화학오염도가 높은 환경에서도 측정에 무리가 없고, 안정성을 유지 할 수 있습니다. 또한 지속적인 고습환경과 100bar에 이르는 압력에도 적용 될 수 있습니다.
EE33 는 각각의 특수한 설계에 따라 아래의 환경에 적용될 수 있습니다.
EE33 모델의 핵심은 E+E Elektronik에서 박막센서기술을 토대로 새로 개발한 온습도 일체형 소자 HMC01 에 있습니다.
HMC01은 센서가 화학물질에 오염이 되었거나 응축현상이 발생 하였을 경우 이들 물질이 증발할 수 있도록 특수 디자인 되었습니다. 그리하여 센서가 신속히 원래의 상태를 회복하여 측정을 계속해서 진행할 수 있습니다.
더욱이 E+E 만의 기술로 만든 센서 코팅을 활용하면 센서를 부식시키는 물질이나 short-circuit을 야기하는 오염물질로 부터 센서를 보호할 수 있습니다.
고객이 편리하게 사용할 수 있도록 만들어진 설정소프트웨어가 제품과 함께 제공되며 소프트웨어를 사용하여 센서의 가열 시간, 출력 설정등을 변경 조정 가능합니다.
저희 제품에 대해 더 알고 싶으십니까?
언제든지 도와드리겠습니다.
0...100% RH
-40...180°C
±1.3% RH
±0.2°C
< 15s
응답속도RS232C + optional RS485
직렬 인터페이스0-1/5/10 V or 0/4-20 mA
출력24 V AC/DC
공급전원저희 제품에 대해 더 알고 싶으십니까?
언제든지 도와드리겠습니다.
대기습도와 온도는 기상학에 있어 매우 중요한 역할을 합니다. 이러한 기후 매개변수의 고정밀 측정은 정확한 예측과 의미있는 기록의 기본입니다.
외부 온도와 상대 습도의 모니터링은 풍력 시스템의 부드러운 작동을 위해 필수입니다. 풍력발전용 터빈의 안전하고 효과적인 운영을 확신하기 위해 기상상태는 반드시 모니터 되어야 합니다.
연료전지내에서 수소와 산소는 효과적으로 전기와 열을 만들기 위해 조절된 방식내에서 반응합니다. 만들어진 전압은 연료, 전지의 품질, 온도 그리고 사용된 가스의 상대 습도의 영향을 받습니다.
Datasheet |
---|
EE33 Datasheet(1438.98 kb) |
Scaling of the outputs(252.78 kb) |
EE-PCA Product Configuration Adapter(790.77 kb) |
Accessories(4231.46 kb) |
Humidity Calibration-Kit Datasheet(642.96 kb) |
Manual |
---|
EE33 Manual(3192.09 kb) |
Calibration Kit - User Guide(537.45 kb) |
Cleaning Instructions(891.89 kb) |
Software |
---|
EE-PCS Product Configuration Software(21501.32 kb) |
Support literature |
---|
Information about the monolithic humidity sensor HMC01(77.14 kb) |
Communication protocol for industrial transmitter(140.99 kb) |
EU Declaration of Conformity |
---|
EE33 CE-DoC(299.11 kb) |
Declaration of Conformity to EU REACH(366.08 kb) |
Material: stainless steel
Filter: PTFE memrane, replaceable
Pores size: 2 µm
Length: 39mm (1.54")
For average mechanical stress
High pollution levels
Continuous high humidity
Condensing environment
For EE33-J and EE33-K in:
Meteorology
Material: PTFE sintered
Pores size: 50 µm
Length: 33mm (1.30")
For very dirty, oily environment
T range: -40...180°C (-40...176°F)
Response time t10/90: 14s
Industrial process control
Chemical industry
Very polluted environment
Unsuitable for condensing environment
DESCRIPTION
DESCRIPTION
DESCRIPTION
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.
The calibration / adjustement interval depend from the application and from the requirements of the specific industry. See also "Princibles of Humidity measurement".
The product data sheet indicates if and what type of inspection certificate is included in to standard scope of supply. Most of the E+E measurement devices feature an inspection certificate according to DIN EN 10204-3.1 or DIN EN 10204-2.2. An accredited calibration certificate is available on request, see the E+E scope of accreditation at our calibration website.
Temperature gradients along the sensing probes lead to relevant measurement errors. Whenever possible, install the entire probe inside the space to be monitored. If the probe is installed into a separation wall, make sure to isolate thermally the part of the probe looking out of the wall at the cable side.
Response time of a humidity sensor protected by the E+E proprietary coating is slightly longer than the response time without coating. Please see the data sheet of the specific sensor.
Coating does not help again chemicals in gazeous form. Contact an E+E sales representative for details on the influence of certain chemicals onto the humidity sensing elements.
The E+E propritary Coating helps in dirty, dusty and corrosive environment. salts, off-shore applications). It improves the sensor’s long term stability in dusty, dirty or oily applications by preventing stray impedances caused by deposits on the active sensor surface and on its connecting leads.
The E+E proprietary sensor coating is a protective layer applied to the active surface and leads of the sensing elements. The coating extends the lifetime and the measurement performance of the E+E sensor.
How can I clean the filter cap of a humidity measuring device?
High dew point means the difference between the ambient temperature and the dew point temperature is lower than 3 °C. It corresponds to RH > 85%.
The appropriate product is the EE33-K. The device features a heated sensing element.