Kondensation auf dem monolithischen Feuchtesensor und der Filterkappe wird durch kontrolliertes Heizen des Sensorelements verhindert.
Das Messprinzip des EE33-T17 mit zwei Fühlern und dualem Heizsystem ermöglicht eine kontinuierliche, genaue Messung selbst bei permaneneter Hochfeuchte. Der abgesetzte Fühler kann bis 180 °C und die druckdichte Ausführung bis 100 bar eingesetzt werden.
Das robuste Aluminiumgehäuse ermöglicht dank des 3-teiligen Konzepts eine einfache Montage und Austausch des Messumformers.
Alle Messgrößen sind auf den beiden Analogausgängen oder auf der digitalen Schnittstelle verfügbar. Der optionale Relaisausgang kann für Alarmierungen und zur Prozessregelung verwendet werden. Das optionale Sensorcoating schützt das Sensorelement und dessen Kontaktierungen vor Korrosion und elektrisch leitender Verschmutzung.
Typische Anwendungen
Sie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
0...100% rF
-40...180°C
±1,3% rF
±0,2°C
< 15s
AnsprechzeitRS232C + optional RS485
Serielle Schnittstelle0-1/5/10 V oder 0/4-20 mA
Ausgänge24 V AC/DC
SpeisungSie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
Luftfeuchte und Temperatur spielen in der Meteorologie eine wichtige Rolle. Hochgenaue Messung dieser Klimagrößen ist die Basis für treffende Vorhersagen und aussagekräftige Aufzeichnungen
Überwachung von Außentemperatur und relativer Feuchtigkeit ist essentiell für den reibungslosen Betrieb von Windkraftanlagen.Um einen effizienten und sicheren Betrieb von Windrädern sicherzustellen müssen die Wetterbedingungen konstant überprüft werden
In Brennstoffzellen reagieren Wasserstoff und Sauerstoff in einer kontrollierten Art und Weise um effizient Strom und Wärme zu erzeugen. Die erreichte Spannung ist vom Brennstoff, der Qualität der Zelle, der Temperatur und der relativen Luftfeuchte der verwendeten Gase abhängig
Datenblatt |
---|
EE33 Datenblatt(1421 kb) |
Abbildungsbereich Messgrößen(254.46 kb) |
EE-PCA Konfigurationsadapter(814.63 kb) |
Zubehör(4234.31 kb) |
Feuchte Kalibrier-Kit Datenblatt(666.9 kb) |
Handbuch |
---|
EE33 Bedienungsanleitung(3192.09 kb) |
Calibration Kit - User Guide(537.45 kb) |
Reinigungsanleitung(891.89 kb) |
Software |
---|
EE-PCS Product Configuration Software(21501.32 kb) |
Support Literatur |
---|
Information monolithischer Feuchtesensor HMC01(77.12 kb) |
Protokollbeschreibung für Industrietransmitter(135.78 kb) |
EU Declaration of Conformity |
---|
EE33 CE-DoC(299.11 kb) |
Declaration of Conformity to EU REACH(366.08 kb) |
Material: stainless steel
Filter: PTFE memrane, replaceable
Pores size: 2 µm
Length: 39mm (1.54")
For average mechanical stress
High pollution levels
Continuous high humidity
Condensing environment
For EE33-J and EE33-K in:
Meteorology
Material: PTFE sintered
Pores size: 50 µm
Length: 33mm (1.30")
For very dirty, oily environment
T range: -40...180°C (-40...176°F)
Response time t10/90: 14s
Industrial process control
Chemical industry
Very polluted environment
Unsuitable for condensing environment
DESCRIPTION
DESCRIPTION
DESCRIPTION
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.
The calibration / adjustement interval depend from the application and from the requirements of the specific industry. See also "Princibles of Humidity measurement".
The product data sheet indicates if and what type of inspection certificate is included in to standard scope of supply. Most of the E+E measurement devices feature an inspection certificate according to DIN EN 10204-3.1 or DIN EN 10204-2.2. An accredited calibration certificate is available on request, see the E+E scope of accreditation at our calibration website.
Temperature gradients along the sensing probes lead to relevant measurement errors. Whenever possible, install the entire probe inside the space to be monitored. If the probe is installed into a separation wall, make sure to isolate thermally the part of the probe looking out of the wall at the cable side.
Response time of a humidity sensor protected by the E+E proprietary coating is slightly longer than the response time without coating. Please see the data sheet of the specific sensor.
Coating does not help again chemicals in gazeous form. Contact an E+E sales representative for details on the influence of certain chemicals onto the humidity sensing elements.
The E+E propritary Coating helps in dirty, dusty and corrosive environment. salts, off-shore applications). It improves the sensor’s long term stability in dusty, dirty or oily applications by preventing stray impedances caused by deposits on the active sensor surface and on its connecting leads.
The E+E proprietary sensor coating is a protective layer applied to the active surface and leads of the sensing elements. The coating extends the lifetime and the measurement performance of the E+E sensor.
How can I clean the filter cap of a humidity measuring device?
High dew point means the difference between the ambient temperature and the dew point temperature is lower than 3 °C. It corresponds to RH > 85%.
The appropriate product is the EE33-K. The device features a heated sensing element.