EE371은 E+E의 일체형회로의 단일기판 형태(monolithic)의 습도소자 HMC01를 적용 후 정교한 자동 교정 절차를 걸쳐 ±2°C Td (±3.6°F Td)의 보다 더 나은 정확도와 뛰어난 장기 안정성을 제공합니다.
견고한 메탈재질의 외형과 360도 회전 가능한 디자인 그리고 샘플링 셀 사용으로 다양한 공정에 간편하게 설치 가능 합니다. 측정 된 데이터는 4-20mA 또는 0-1/5/10V 아날로그 출력 및 LCD 디스플레이로 제품 액정에서 바로 확인 할 수 있습니다.
무료제공 소프트웨어 EE-PCS와 옵션으로 구매 가능한 아답터를 사용해 EE371의 설정값을 간편하게 구성 및 조정할 수 있습니다.
저희 제품에 대해 더 알고 싶으십니까?
언제든지 도와드리겠습니다.
-60...60 °C (-76...140 °F) Td
Measuring range±2 °C (±3.6 °F) Td
Accuracy0-1/5/10 V or 0/4-20 mA
Outputs15-30 V DC
Supply저희 제품에 대해 더 알고 싶으십니까?
언제든지 도와드리겠습니다.
Datasheet |
---|
EE371 Datasheet(952.16 kb) |
Scaling of the outputs(252.78 kb) |
EE-PCA Product Configuration Adapter(790.77 kb) |
Accessories(4231.46 kb) |
Manual |
---|
EE371 Manual(1576.63 kb) |
EE371 Quick Guide(770.14 kb) |
Cleaning Instructions(891.89 kb) |
Software |
---|
EE-PCS Product Configuration Software(21982.92 kb) |
EU Declaration of Conformity |
---|
EE371 CE-DoC(61.54 kb) |
Declaration of Conformity to EU REACH(367.42 kb) |
Material: sintered stainless
Pores size: 10 µm
Length: 33mm (1.30")
For high mechanical stress and strong pollution
T range: -40...180°C (-40...176°F)
Response time t10/90: 30s
Industrial process control
Agriculture
Life stock barns
Unsuitable for condensing environment
The dew point temperature (Td) indicates where condensation begins. The frost point temperature (Td) indicates where icing begins.
Yes, the probe and the sensing element of all E+E dew point measurement devices is wettable.
Low dew point means the difference between the ambient temperature and the dew point temperature is higher than 40 °C (72 °F). This corresponds to RH < 5%.
The appropriate products are the EE371 and EE355. Both devices feature an auto-calibration procedure.
The auto-calibration corrects periodically even the smallest drift of the capacitive sensor at very low relative humidity. This is neccessary for high accuracy and long term stability of the dew point measurement. The auto-calibration is performed every 30 minutes and takes approx. 3 minutes. During the auto-calibration, the output is frozen at the last measured dewpoint value.
Auto-calibration is used by EE371 and EE355.
The standard scope of supply of E+E dew point sensors includes an inspection certificate according DIN EN 10204 - 3.1. For details on calibration certificates please see page 5 in www.kalibrierdienst.at/fileadmin/content/White_Paper_Calibration_and_traceability_in_measuring_technology.pdf
Accredited calibration certificate for dew point temperature is available upon request, please see our calibration website.
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.