The EE371 features the innovative, monolithic E+E HMC01 humidity and temperature sensing element. In combination with a sophisticated auto-calibration procedure, this leads to accuracy better than ±2°C Td (±3.6 °F Td) and to excellent long term stability.
The robust metal enclosure, the swirling front-end, various process connections and sampling options allow for easy and comfortable design-in, mounting and operation. The measured data is available on two freely configurable voltage or current outputs as well as on the LCD display.
An optional adapter and the free EE-PCS Product Configuration Software facilitate easy configuration and adjustment of the EE371.
-60...60 °C (-76...140 °F) TdMeasuring range
±2 °C (±3.6 °F) TdAccuracy
0-1/5/10 V or 0/4-20 mAOutputs
15-30 V DCSupply
EE371 Datasheet(952.16 kb)
Scaling of the outputs(252.78 kb)
EE-PCA Product Configuration Adapter(790.77 kb)
EE371 Manual(1576.63 kb)
EE371 Quick Guide(770.14 kb)
Cleaning Instructions(891.89 kb)
EE-PCS Product Configuration Software(21501.32 kb)
|EU Declaration of Conformity|
EE371 CE-DoC(61.54 kb)
Declaration of Conformity to EU REACH(72.4 kb)
Material: sintered stainless
Pores size: 10 µm
Length: 33mm (1.30")
For high mechanical stress and strong pollution
T range: -40...180°C (-40...176°F)
Response time t10/90: 30s
Industrial process control
Life stock barns
Unsuitable for condensing environment
The dew point temperature (Td) indicates where condensation begins. The frost point temperature (Td) indicates where icing begins.
Yes, the probe and the sensing element of all E+E dew point measurement devices is wettable.
Low dew point means the difference between the ambient temperature and the dew point temperature is higher than 40 °C (72 °F). This corresponds to RH < 5%.
The appropriate products are the EE371 and EE355. Both devices feature an auto-calibration procedure.
The auto-calibration corrects periodically even the smallest drift of the capacitive sensor at very low relative humidity. This is neccessary for high accuracy and long term stability of the dew point measurement. The auto-calibration is performed every 30 minutes and takes approx. 3 minutes. During the auto-calibration, the output is frozen at the last measured dewpoint value.
Auto-calibration is used by EE371 and EE355.
The standard scope of supply of E+E dew point sensors includes an inspection certificate according DIN EN 10204 - 3.1. For details on calibration certificates please see page 5 in www.kalibrierdienst.at/fileadmin/content/White_Paper_Calibration_and_traceability_in_measuring_technology.pdf
Accredited calibration certificate for CO2 is available upon request, please see our calibration website.
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.