Das verwendete NDIR-Zweistrahlverfahren mit Autokalibration ist besonders langzeitstabil und unempfindlich gegenüber Verunreinigungen. Durch die werksseitige Mehrpunkt CO2- und Temperaturjustage und die hervorragende Temperaturkompensation sind exakte CO2-Messungen über einen weiten Temperatureinsatzbereich möglich. Der Einfluss des Umgebungsdrucks auf die CO2-Messgenauigkeit wird durch den integrierten Drucksensor automatisch kompensiert.
Die Messdaten mit einem Messbereich von bis zu 1% CO2 stehen auf der digitalen Schnittstelle I2C oder E2 zur Verfügung.
Ein optionales Kit ermöglicht die einfache Konfiguration des Moduls und die Einstellung der CO2-, rF-, T- und p-Messung über die E2-Schnittstelle. Das CO2-Messintervall des EE894 kann individuell konfiguriert werden. Dadurch lässt sich die Stromaufnahme des Moduls auf 420 μA reduzieren. Dies ist unter anderem für den Einsatz in batteriebetriebenen Geräten ideal.
Typische Anwendungen
Sie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
0...2000 ppm
0...5000 ppm
0...10000 ppm
±(50 ppm +2% of mv)
±(50 ppm +3% of mv)
±(100 ppm +5% of mv)
0…95 % rF (nicht kondensierend)
Messbereich relative Feuchtetyp. ± 3 % rF
Genauigkeit relative Feuchte bei 25 °C und 20...80% rF700…1100 mbar
Messbereich Drucktyp. ± 2 mbar
Genauigkeit Druck bei 25 °C und 20...80% rF-40…60 °C
Messbereich Temperaturtyp. ± 0.5 °C
Genauigkeit Temperatur bei 25 °CI²C oder E2
Digitale Schnittstellen4.75-7.5V DC
VersorgungSie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
Datenblatt |
---|
EE894 Datenblatt(1124.11 kb) |
Handbuch |
---|
EE894 Handling instruction(1039.37 kb) |
EE893 to EE894 Transition Guide(828.53 kb) |
EE892 to EE894 Transition Guide(970.15 kb) |
Software |
---|
EE-PCS Product Configuration Software(21982.92 kb) |
Support Literatur |
---|
Utilising the E2 Interface for EE894 - AN1808-1(296.53 kb) |
E2 interface specification(223.84 kb) |
I²C interface specification(1252.75 kb) |
EU Declaration of Conformity |
---|
EE894 DoC-CE(220.45 kb) |
Open Source |
---|
Codes for EE894 on GitHub(17.57 kb) |
I²C a standardized on-board serial interface between one controller and multiple devices using data and clock line. For details about I²C, please see NXP UM10204 I²C-bus specification and user manual, Rev. 6, 4 April 2014.
E2 is a serial interface designed by E+E with unique command structure as well as reduced clock speed comparted to I²C. For more details about please see E2 Interface Specification.
The maximum cable length depends on the product, clock speed and pull-up resistor, and can be up to 10m. For detail please see E2 interface for humidity probes/modules.
I²C is an on-board interface, with bus lines up to 10cm. For longer bus please see the NXP wiring pattern.
Only one E+E device can be connected to the E2 interface of a controller.
Each I²C devices does have it's own ID by series, as long as this ID is unique in the bus this module or component could get built into the bus.
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.