Analogue, digital or passive room temperature sensors for residential and commercial HVAC.
The very stylish EE10-T enclosure is available in European and US size and in several colours. The snap-on concept allows for easy installation. The active part of the device can be replaced within seconds without any tools.
The measured data is available either on the analogue output or on the Modbus RTU or the BACnet interface, as well as on the optional display. An EE10-T version with passive temperature output is also available.
- Elegant design
- Easy installation and service
- Analogue, passive, Modbus RTU or BACnet output
0...50 °C (32...122 °F)Measuring range
±0.3 °C (±0.54 °F)Accuracy
0-10V, 4-20mA, Modbus RTU, BACnetOutputs
passive temperature output
24 V AC/DCSupply
Send us your e-mail, we will do our best to help you!
EE10-T Datasheet(506.25 kb)
Scaling of the outputs(252.78 kb)
Duct / Immersion Temperature Sensor
Reliable measurement in air and liquids. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
Strap-on Temperature Sensor
Reliable measurement on round ducts and pipes. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
Wall Mounted Temperature Sensor for Indoor and Outdoor
Reliable measurement indoors and outdoors. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
Cable Temperature Sensors
Ideal for both HVAC systems and process control in gases and, with immersion well, in liquids.
Temperature Sensor with Remote Probe
Reliable measurement in applications with space restrictions. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
Humidity and Temperature Room Sensor
Analog, Modbus, BACnet or passive output in an elegant, easy to install enclosure. Ideal for residential and commercial building automation.
What is the difference between Modbus RTU and Modbus TCP/IP?
The main difference is the hardware interface. The Modbus RTU protocol runs on RS485 Hardware while Modbus TCP/IP protocol on Ethernet hardware.
What is the difference between a 2 wire and a 3 wire current output?
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.