Das Sensorelement garantiert beste Genauigkeit, bewährte Langzeitstabilität und bietet auf Grund des Designs höchste Reproduzierbarkeit der Messergebnisse und hohe Resistenz gegen Verschmutzung. Der Strömungsfühler ist als Kabelversion sowie mit Stecksystem verfügbar.
Durch einen Führungssteg am Fühlerrohr und einem dazu passendem Montageflansch (im Lieferumfang enthalten) ist die Fühlerausrichtung vorgegeben. Durch den Flansch kann die Eintauchtiefe stufenlos eingestellt werden. Die im Fühlerrohr integrierte Elektronik stellt für Strömungsbereiche bis 20 m/s ein Analogsignal (wahlweise 0 - 1 V, 0 - 5 V oder 0 - 10 V) oder ein digitales Modbus RTU Signal zur Verfügung.
Durch die digitale Setup-Schnittstelle kann mithilfe eines Konfigurationskits kundenseitig der gewünschte Messbereich und das Ausgangssignal eingestellt werden und eine kundenspezifische Justage durchgeführt werden.
Typische Anwendungen
Sie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
Der EE671 ist kompatibel mit dem Sigma 05 Host-Gerät der modularen E+E Sensor Plattform. Ihre Kombination stellt eine vielseitige, modulare plug-und-play rF / T Sensoreinheit mit analogen Ausgängen und optionalem Display dar. Neben dem EE072 nimmt der Sigma05 auch andere intelligente E+E Messfühler auf. Siehe www.epluse.com/Sigma05 für weitere Details.
0...5m/s
0...10m/s
0...15m/s
0...20m/s
0,5... 5m/s: ±(0,2m/s +3% vom MW)
1... 10m/s: ±(0,3m/s +4% vom MW)
1... 15m/s: ±(0,35m/s +5% vom MW)
1... 20m/s: ±(0,4m/s +6% vom MW)
0-1/5/10 V (max. 1 mA)
Modbus RTU
10-29V DC SELV
Sie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
Datenblatt |
---|
EE671 Datenblatt(804.85 kb) |
EE-PCA Konfigurationsadapter(814.63 kb) |
Handbuch |
---|
EE671 Bedienungsanleitung(820.26 kb) |
EE671 Quick Guide(281.83 kb) |
Software |
---|
PCS10 Product Configuration Software(59785.25 kb) |
Support Literatur |
---|
Modbus Application Note AN0103(181.41 kb) |
EU Declaration of Conformity |
---|
EE671 CE-DoC(242.19 kb) |
EE671 (RS485) CE-DoC(250.91 kb) |
Declaration of Conformity to EU REACH(366.08 kb) |
Due to its design and materials, the E+E thin film sensing element for air velocity is highly insensitive to pollution. When operaten in very dusty or diry environment, cleaning might be necessary. See section maintenance at downloads.epluse.com/fileadmin/data/miscellaneous/datasheet_air_velocity_measurement_basics.pdf
This is not possible. Return the device to E+E for service.
The standard scope of supply of E+E air velocity sensors includes an inspection certificate according DIN EN 10204 - 2.2 or DIN EN 10204 - 3.1, depending on the model. Please see the product data sheet and operation manual for the type of certificate. For details on calibration certificates please see page 5 in www.kalibrierdienst.at/fileadmin/content/White_Paper_Calibration_and_traceability_in_measuring_technology.pdf
Accredited calibration certificate for air velocity is available upon request, please see our calibration website.
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.