Insertion Moisture in Oil Probe with Modbus RTU

Open Link in LightboxMOP301 probe for moisture in oil with the optional ball valve pressure tight up to 20 bar
  • Moisture in Oil
  • Sigma 05

MOP301

The MOP301 insertion probe measures accurately water activity (aw) and temperature (T) in lubrication, hydraulic and insulation oil. In addition it calculates the absolute water content of the oil (x) in ppm. The slide fitting allows for easy installation and removal under pressure up to 20 bar.

  • MOP301 probe for moisture in oil with the optional ball valve pressure tight up to 20 bar

    MOP301 probe for moisture in oil with the optional ball valve pressure tight up to 20 bar

  • MOP301 probe for moisture in oil with slide fitting

    MOP301 probe for moisture in oil with slide fitting

  • DNV certificate applies to MOP301 with probe length 200 mm

  • Moisture in oil probe MOP301 with Sigma 05

    Moisture in oil probe MOP301 with Sigma 05

    Precise and reliable measurement of oil moisture 
    The E+E humidity sensor elements used in the MOP301 are characterised by particularly good long-term stability and resistance to contamination. They are the basis for the high accuracy and reliability of the moisture and temperature measurement. 

    Versatile in Use
    Mechanically, the MOP301 impresses with a robust stainless steel housing with protection class IP66, an oil-resistant cable and a moulded M12x1 plug connection. It can be used in a temperature range from -40 to 120 °C and up to 20 bar pressure.

    Different probe and cable lengths as well as the slim design allow a particularly flexible installation of the MOP301. Thanks to the practical process connection with ISO or NPT thread, the immersion depth can be set precisely. With the aid of an optional ball valve, the sensor can be installed and removed without interrupting the process. 

    Measured values and interfaces  
    The MOP301 provides the moisture content of the oil as an absolute or relative value. The water activity (aw) provides information about how close the oil is to the saturation point at a certain temperature. The water content (x) indicates in absolute terms the moisture level is expressed as water content (x) in ppm, representing mg water / kg oil. Based on the measured water activity (aw) and temperature, the MOP301 calculates the absolute water content (x) in ppm.

    The oil-specific parameters required for the calculation can already be preconfigured when ordering or can be stored with the help of the PCS10 Product Configuration Software.

    Typical applications

    Monitoring of

    • transformer oil
    • lubrication oil
    • hydraulic oil
    • diesel fuel

    For the use of this service, prior consent to the processing of your data and in particular to the setting of cookies is necessary. You can consent to the processing and setting of cookies here. Without your consent, your data will not be processed in connection with this service and no cookies will be set. You can revoke your consent at any time. For more information on cookies and the processing of your data in connection with this content and a way to revoke your consent, please see our privacy policy.

    Sigma 05 - Modular Sensor Platform

    The MOP301 is compatible with the Sigma 05 host device of the E+E Modular Sensor Platform. Together they become a versatile, plug-and-play moisture in oil and temperature sensor with interchangeable probe, analogue outputs and optional display. Besides MOP301, Sigma 05 accommodates also other E+E intelligent sensing probes. See www.epluse.com/Sigma05 for further details.

    Moisture in oil probe MOP301 with Sigma 05

    Key Features

    • High measurement accuracy and wide temperture range
    • Suitable for transformer, lubrication and hydraulic oil
    • Process connection with ISO or NPT slide fitting
    • Pressure tight up to 20 bar with the optional ball walve
    • Calculation of water content x [ppm]
    • Stainless steel enclosure and filter cap with IP66 rating
    • RS485 with Modbus RTU
    • Editable Modbus-Map Area
    • Moulded M12x1 connector
    • Oil resistant cable

    Technical data

    Measuring Range
    0...1 aw
    -40...120 °C (-40...248 °F)
    Accuracy
    ±0.02 aw
    ±0.15 °C
    Digital Interface
    RS485 with Modbus RTU
    Supply
    8-35 V DC

    Calibrating your limits

    Your products and services can only be as precise as the tools you use to measure them. With more than 20 years of experience, the calibration team of E+E Elektronik focuses on providing a reliable service without any unnecessary delays or bias.

    Discover the value of working with an expert in calibration that prioritizes

    • accuracy,
    • fastness and
    • reliability

    Learn more

    Downloads MOP301

    Software

    You want to know more about our products?

    LinkedIn Logo