The EE260 humidity and temperature probe with heated humidity sensing element and probe heating delivers precise and reliable measuring results even at high humidity conditions.
The EE260 humidity and temperature probe has a dual heating system (sensing element and probe heating). This prevents condensation on the RH sensing element, the sensing head and the filter cap. The probe therefore provides precise and reliable measurement results even in the case of permanent high humidity.
Another benefit of the dual heating system is the very short response time and a fast recovery after condensation.
The E+E sensor coating improves the long-term stability and service life in dusty and corrosive environments.
Compact and Robust
The innovative enclosure of the EE260 combines a heated humidity sensing head and an additional temperature sensing element in a single probe.
Due to its compact design, the probe is compatible with commercially available rotationally symmetric sensor radiation shields.
The robust IP67 enclosure made of UV- and heat-resistant elastomer protects the internal electronics from environmental influences and mechanical damage.
Analogue and Digital
The EE260 probe provides the measured data simultaneously on two freely configurable voltage outputs and via the RS485 interface (Modbus RTU).
Based on the measured humidity and temperature values, the EE260 calculates further humidity-related quantities such as the dew point temperature, absolute humidity or mixing ratio.
- Meteorological weather stations
- Weather warning systems (road traffic, airports)
- Detection of icing hazard
EXTEND YOUR WARRANTY UP TO 5 YEARS WITH THE NEW
E+E CALIBRATION SERVICE PACKAGES
Our calibration service packages ensure that you are on the safe side when it comes to the accuracy and vailability of your measuring devices. Choose the right service package for your E+E product and benefit rom professional device service, calculable costs and excellent measuring accuracy in the long-term. Here you can find more detailed information.
- Excellent measurement performance and high accuracy in the high humidity range
- Compact, robust IP67 enclosure
- Heated RH sensing element and heated sensing head
- Two freely configurable voltage outputs
- Integrated T sensing element
- RS485 interface with Modbus RTU protocol
- Short response time and a fast recovery after condensation
- Calculation of all relevant humidity related quantities
- E+E sensor coating against pollution and corrosion for best long term stability
- Compatible with rotationally symmetric sensor radiation shields
- Measuring range - Humidity
- 0...100% RH
- Accuracy - Humidity
- ±1.3% RH
- Measuring range - Temperature
- -60...60 °C (-76...140 °F)
- Accuracy - Temperature
- analogue: 0.15 °C (0.27°F)
digital: 0.1 °C (0.18°F)
- Digital interface
- RS485 with Modbus RTU
- Analogue Outputs
- 7 - 30 V DC