EE441
Strap-on Temperature Sensor
The EE441 measures accurately the temperature on round ducts and pipes and is optimized for heating systems (warm and cold water pipes) or solar collectors.
Inquire now
The T measured data is available on the voltage or current output, as well as on the RS485 interface with Modbus RTU or BACnet MS/TP protocol. In addition, EE441 features a wide choice of sensing elements for passive T measurement.
The compact enclosure and the stainless steel hose clamp allow for easy and fast installation on pipes with diameter from 25 mm to 175 mm (0.98"...6.89").
An optional adapter and the free EE-PCS Product Configuration Software facilitate the setup and adjustment of the EE441.
Enclosure
- IP65 / NEMA4
- External mounting holes
- Bayonet screws
- Hose clamp
- Aluminium contact surface
You want to know more about our products?
We are looking forward to help you.
Technical data EE441
-40...70 °C (-40...158 °F)
Operating temperature±0.3 °C (±0.54 °F)
Accuracy active output0-10 V or 4-20 mA
Analogue outputRS485 with Modbus RTU or BACnet MS/TP
Digital interfaceIP65 / NEMA 4
Protection class24 V AC/DC
Supply
You want to know more about our products?
We are looking forward to help you.
Related products
EE431
Duct / Immersion Temperature Sensor
Reliable measurement in air and liquids. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
EE451
Wall Mounted Temperature Sensor
Reliable measurement indoors and outdoors. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
EE461/EE462/EE432
Cable Temperature Sensors
Ideal for both HVAC systems and process control in gases and, with immersion well, in liquids.
EE471
Temperature Sensor with Remote Probe
Reliable measurement in applications with space restrictions. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
EE10-T
Room Temperature Sensor
Analogue, Modbus or BACnet output in an elegant, easy to install enclosure. Ideal for residential and commercial building automation.
Downloads EE441
| Datasheet |
|---|
EE441 Datasheet(830.58 kb) |
Scaling of the outputs(252.78 kb) |
EE-PCA Product Configuration Adapter(790.77 kb) |
| Manual |
|---|
EE4x1 Quick Guide Digital Interface(584.95 kb) |
EE4x1 PICS - BACnet Protocol Implementation(245.97 kb) |
| Planning Data |
|---|
EE441 BIM - Building Information Modeling (ifc)(109.06 kb) |
| EU Declaration of Conformity |
|---|
EE4x1 (active) CE-DoC(332.05 kb) |
EE4x1 (passive) CE-DoC(296.55 kb) |
Declaration of Conformity to EU REACH(72.4 kb) |
EE441 FAQ
What is the difference between a 2 wire and a 3 wire current output?
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.