The Sigma 05 sensor hub represents the central element of the E+E modular sensor ecosystem with intelligent probes, analogue outputs and display. With pluggable, interchangeable probes, the modular sensor platform is suitable even for harsh and challenging environment. The Sigma 05 is available with polycarbonate or die-cast aluminium enclosure.
Flexibility: Multiple Probes and Measurands The Sigma 05 accommodates up to 3 E+E sensing probes with RS485 interface and Modbus RTU protocol. Up to 5 measurands can be assigned to the two freely selectable and scaleable analogue outputs and to the optional graphic display.
Plug-and-Play Sigma 05 features automatic detection of E+E probes and performs an autonomous, rule based hub setup. Refer to the user manual for details.
Configuration and Adjustment The free PCS10 Product Configuration Software allows for easy setup of the Sigma 05, measurand assignment and thresholds, display layout, scaling of the analogue outputs and adjustment of the connected probes.
A functional and accuracy check of the Sigma 05 can be performed with the E+E Reference Probe Modbus RTU instead of the regular sensing probes. The reference probe supplies fixed values for a wide choice of measurands and features an individual certificate. Refer to the Reference Probe Modbus RTU Quick Guide for further details.
We are always available to answer any questions you may have!Inquire now
Plug and play with out of the box E+E Modbus probes
Accommodates up to 3 E+E Modbus Probes
Handles up to 5 physical quantities simultaneously (2 on the outputs, 3 on the display)
Status information on the display and via LEDs on the electronics board
IP65 / NEMA 4 enclosure
Polycarbonate or die-cast aluminium enclosure available
User configurable alarm indication on the display
M12 probe connection, direct onto Sigma 05 or via M12 cables
USB service interface and free product configuration software
MAX. NUMBER OF SENSINGS PROBES
3
MAX. NUMBER OF MEASURANDS (* 2 ON THE ANALOGUE OUTPUTS / 3 ON THE DISPLAY)
5
PROBE INTERFACE
RS485
PROTOCOL
Modbus RTU
ANALOG OUTPUTS
0 - 1 V / 2.5 V / 5 V / 10 V0 / 4 - 20 mA (3-wire)
ACCURACY OF ANALOGUE OUTPUTS AT 20 °C (68 °F) (*FS = FULL SCALE)
0.02 % FS for 0 - 10 V and 0 - 20 mA
PROTECTION RATING
IP65 / NEMA 4
You want to know more about our products?Inquire now
For the use of this service, prior consent to the processing of your data and in particular to the setting of cookies is necessary. You can consent to the processing and setting of cookies here. Without your consent, your data will not be processed in connection with this service and no cookies will be set. You can revoke your consent at any time. For more information on cookies and the processing of your data in connection with this content and a way to revoke your consent, please see our privacy policy.
In meteorology, precise sensors are crucial for accurate weather monitoring and forecasting. At E+E Elektronik, our advanced sensor technology provides unparalleled data reliability, helping customers make informed decisions and improve environmental predictions, ultimately enhancing safety and operational efficiency
Custom solutions for precise results
For more than 40 years, E+E Elektronik has been developing and manufacturing its highly precise and long-term stable sensors exclusively at its headquarters in Engerwitzdorf, Austria. The high level of vertical integration – from the sensor element to the precisely calibrated measuring device – ensures compliance with the highest quality standards and enables a quick response to customer-specific requirements.
E+E Elektronik offers:
Accredited sensor calibration for the highest quality standards
Efficient service – worldwide through local offices
This software is provided "AS IS" without a warranty or representations of any kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT ARE HEREBY EXCLUDED. E+E AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL E+E OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF E+E HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.THE ENTIRE RISK ARISING OUT OF USE, PERFORMANCE OR NON-PERFORMANCE OF THE SOFTWARE REMAINS WITH THE LICENSEE. IF E+E SHOULD NEVERTHELESS BE FOUND LIABLE, WHETER DIRECTLY OR INDRECTLY, FOR ANY LOSS, DAMAGE OR INJURY ARISING UNDER THIS AGREEMENT OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, ON ANY BASIS WHATSOEVER, ITS TOTAL MAXIMUM LIABILITY IS LIMITED TO EURO 50.000. WHICH WILL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST E+E. IF THIS LIMIT OF EURO 50.000 SHOULD NOT BE VALID BOTH PARTIES AGREE UPON THE NEXT ADMISSABLE LIMIT. All CLAIMS WILL BE TIMEBARRED AFTER 6 MONTH AFTER THE CLAIM AROSE AND THE LICENSEE OBTAINS KNOWLEDGE OF THE CIRCUMSTANCES GIVING RISE TO THE CLAIM OR WOULD HAVE OBTAINED SUCH KNOWLEDGE IF HE HAD NOT SHOWN GROSS NEGLIGENCE.
This software is in particular not designed or intended .for use in on-line control of aircraft, air traffic, aircraft navigation or aircraft communications; or in the design, construction, Operation or maintenance of any nuclear facility. Licensee represents and warrants that it will not use or redistribute the Software for such purposes.
You want to know more about our products?
Explore E+E technology and high-end sensor calibration. Our global team helps you find a custom solution for your production.
Matthew Nemeth | Managing Director E+E Elektronik Corporation USA
This website uses cookies
We use cookies and tracking technologies (including those from third parties) to optimise our website and integrate features such as Google Maps and YouTube.
Your data may be transferred to the USA, where a lower level of data protection compared to the EU applies. Therefore, data transfer will only occur with your explicit consent.
Please choose in the cookie settings which cookies you wish to allow. Non-essential cookies will only be set with your consent. Without your consent, some features of the website may be restricted.
You can withdraw your consent at any time in the cookie settings. For more information, please refer to our Privacy Policy.
Your data protection settings
Enable and disable individual cookies. Required cookies cannot be disabled.
The CallTrackingMetrics tracking code will remember the original source the visitor came from and will continue to show them the tracking number associated to that source.