Der EE23 ist als Wand- oder Kanalmontage sowie mit abgesetzten Messfühlern erhältlich. Das modulare Gehäusekonzept sorgt für eine einfache Montage, Wartung und Austausch.
Die Messdaten stehen an zwei analogen Ausgängen, einem Alarmausgang und auf dem LCD Display zur Verfügung. Das E+E Sensor-Coating schützt den Feuchtesensor vor Korrosion und elektrisch leitender Verschmutzung.
Der EE23 ist frei konfigurierbar und kann mittels Drucktaster auf der Platine oder mit der kostenlosen EE-PCS-Software eingestellt werden.
Typical Applications
Sie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
0...100% rF
-40...180 °C
±1,3% rF
±0,2 °C
0-5/10 V, 0/4-20mA
Ausgänge24 V AC/DC
SpeisungSie haben Fragen zu unseren Produkten?
Gerne. Wir freuen uns über Ihre Anfrage!
Datenblatt |
---|
EE23 Datenblatt(691.22 kb) |
Abbildungsbereich Messgrößen(254.46 kb) |
Zubehör(4234.31 kb) |
Feuchte Kalibrier-Kit Datenblatt(666.9 kb) |
Handbuch |
---|
EE23 Bedienungsanleitung(1375.53 kb) |
EE23 Bedienungsanleitung Kalibration(86.75 kb) |
Calibration Kit - User Guide(537.45 kb) |
Reinigungsanleitung(891.89 kb) |
EU Declaration of Conformity |
---|
EE23 CE-DoC(324.74 kb) |
Declaration of Conformity to EU REACH(366.08 kb) |
Material: PC
Filter: PTFE membrane
Pores size: 1 µm
Length: 34mm (1.34")
Very good protection against fine dust
T range: -40...80°C (-40...176°F)
Response time t10/90: 15s
Building automation
Dusty environment
How can I clean the filter cap of a humidity measuring device?
The E+E propritary Coating helps in dirty, dusty and corrosive environment. salts, off-shore applications). It improves the sensor’s long term stability in dusty, dirty or oily applications by preventing stray impedances caused by deposits on the active sensor surface and on its connecting leads.
Coating does not help again chemicals in gazeous form. Contact an E+E sales representative for details on the influence of certain chemicals onto the humidity sensing elements.
Response time of a humidity sensor protected by the E+E proprietary coating is slightly longer than the response time without coating. Please see the data sheet of the specific sensor.
Temperature gradients along the sensing probes lead to relevant measurement errors. Whenever possible, install the entire probe inside the space to be monitored. If the probe is installed into a separation wall, make sure to isolate thermally the part of the probe looking out of the wall at the cable side.
The product data sheet indicates if and what type of inspection certificate is included in to standard scope of supply. Most of the E+E measurement devices feature an inspection certificate according to DIN EN 10204-3.1 or DIN EN 10204-2.2. An accredited calibration certificate is available on request, see the E+E scope of accreditation at our calibration website.
The calibration / adjustement interval depend from the application and from the requirements of the specific industry. See also "Princibles of Humidity measurement".
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.