The EE441 measures accurately the temperature on round ducts and pipes and is optimized for heating systems (warm and cold water pipes) or solar collectors.
The T measured data, is available on the voltage or current output, as well as on the RS485 interface with Modbus RTU or BACnet MS/TP protocol. In addition, EE441 features a wide choice of sensing elements for passive T measurement.
The compact enclosure and the stainless steel hose clamp allow for easy and fast installation on pipes with diameter from 25 to 175 mm (0.98"...6.89").
An optional adapter and the free EE-PCS Product Configuration Software facilitate the setup and adjustment of the EE441.
- IP65 / NEMA4
- External mounting holes
- Bayonet screws
- Hose clamp
- Aluminium contact surface
-40...70 °C (-40...158 °F)Operating temperature
±0.3 °C (±0.54 °F)Accuracy active output
0-10 V or 4-20 mAAnalogue output
RS485 with Modbus RTU or BACnet MS/TPDigital interface
IP65 / NEMA 4Protection class
24 V AC/DCSupply
Send us your e-mail, we will do our best to help you!
EE441 Datasheet(830.58 kb)
Scaling of the outputs(252.78 kb)
EE-PCA Product Configuration Adapter(727.56 kb)
EE4x1 Quick Guide Digital Interface(584.95 kb)
EE4x1 PICS - BACnet Protocol Implementation(245.97 kb)
Relabeling in case of product configuration change(1339.66 kb)
Duct / Immersion Temperature Sensor
Reliable measurement in air and liquids. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
Wall Mounted Temperature Sensor for Indoor and Outdoor
Reliable measurement indoors and outdoors. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
Cable Temperature Sensors
Ideal for both HVAC systems and process control in gases and, with immersion well, in liquids.
Temperature Sensor with Remote Probe
Reliable measurement in applications with space restrictions. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
Room Temperature Sensor
Analog, Modbus, BACnet or passive output in an elegant, easy to install enclosure. Ideal for residential and commercial building automation.
What is the difference between a 2 wire and a 3 wire current output?
Transmitter with "two-wires" technology receive the power from the process, and the signal is carry on return wire (closed current loop). With technology "three-wires" the power supply is separate from current output: 2 wires are the power supply and third carry the signal.